UL Catalog 2024-2025 - Flipbook - Page 18
CORROSION CONTROL™
DESICCANT PACK AND
DESICCANT PACK
SENSOR (DPS)
As part of the Corrosion Control™ System, the Desiccant Pack
absorbs humidity from the sump environment before it turns
into corrosion-causing moisture. The Desiccant Pack Sensor
provides remote monitoring of the remaining life of the
Desiccant Pack via an EVO™ Series console for efficient
maintenance.
HIGHLIGHTS
SPECIFICATIONS
• The Desiccant Pack is installed within the sump to
maintain optimal non-corrosive levels of humidity,
protecting hardware.
• Enclosure material: Tyvek® spunbond olefin fiber
Application
Maintain a non-corrosive environment
within the sump with the Desiccant Pack(s)
and remotely monitor when the Desiccant
Pack(s) need to be changed to maintain
optimal low humidity
Operation
The Desiccant Pack is installed within the
sump environment to maintain optimal
non-corrosive levels of humidity.
The Desiccant Pack Sensor can be used
to hang one or two Desiccant Packs.
It measures the weight of the Desiccant
Pack and calculates an estimated percent
of life remaining via an EVO™ Series.
• Desiccant blend: 400-450 grams calcium
chloride/starch
• Grommet: #4 stainless steel
• Height: 24"
• Width: 4¾"
• Diameter: 3¼"
• The Desiccant Pack Sensor provides the percent of
remaining life of the Desiccant Pack.
• The Desiccant Pack Sensor hangers allow for multiple
mounting options and can accommodate 1 or 2
Desiccant Packs.
• EVO™ Series compatibility:
• EVO™ 200 and EVO™ 400
• EVO™ 600 and EVO™ 6000
ORDERING INFORMATION
Desiccant Pack and Desiccant Pack Sensor
Model
Description
• Desiccant % remaining.
FMP-DPS-U
Desiccant Pack Sensor with single and
multi-pack hanger and installation kit
• Sensor status (Ok, Desiccant Near Saturation,
Desiccant Saturated - Service Needed, Desiccant
Missing, Desiccant Sensor Overload).
407750906
Desiccant Pack (qty 6)
• EVO™ Series data displayed:
• Trend (Active Drying - Desiccant is actively absorbing
water from environment or Passive Drying - Desiccant
is holding required humidity level).
Note: The FMP-DPS-U wires to the probe module on EVO™ 600 and EVO™ 6000
consoles and to the UDP input channel on EVO™ 200 and EVO™ 400 consoles.
Tyvek® is a registered trademark of E.I. du Pont de Nemours and Company.
Unistrut® is a registered trademark Unistrut Corporation.
18
