UL Catalog 2024-2025 - Flipbook - Page 126
ORDERING INFORMATION
Use the diagrams below along with the Ordering Guide at the bottom to help you build your flexible connector model numbers.
Ordering Options Diagram
A
C
D
E
B
End Fitting Options
EZ*
EZM
SSEZM*
EZF
EZF*
EZFG
MS
FS
HM
SSHM*
HF
BT
BTS
MS90
EZFFT
SSFF*
SSRF*
*These models feature full stainless steel construction.
Ordering Guide
Complete flexible connector part numbers have a specific order and are created using the following guidelines. Please note that full
stainless steel models are available on any flexible connector that does not include swivel end fittings.
ABXCDXE
A = Product Type
FF = IFIREFLEX Flexible Connector
B = Hose Diameter
D & E = End Fitting Options (non-swivel options available in
stainless steel)
EZ = EZ FIT flange only (stainless steel)
EZM = EZ FIT male NPT (SSEZM = stainless steel)
07 = ¾"
EZF = EZ FIT female NPT (SSEZF = stainless steel)
10 = 1"
EZFG = EZ FIT fiberglass glue pipe
15 = 1½"
MS = Male swivel NPT
20 = 2"
30 = 3"
40 = 4"
C = Overall Length in Inches
Use two-digit format
FS = Female swivel NPT
HM = Hex male fixed NPT (SSHM = stainless steel)
HF = Hex female fixed NPT (SSHF = stainless steel)
BT = Hex male fixed BSPT
BTS = Male swivel BSPT
Examples:
FF20X18MSXHM = Flexible connector with swivel end fitting(s), 2" hose diameter, 18"
overall length, with one male swivel end fitting and one fixed Hex male end fitting.
FF20X18SSEZMXSSHM = Flexible connector, 2" hose diameter, 18" overall
length, with one stainless steel EZ Fit male end fitting and one stainless steel
fixed hex male end fitting, full stainless steel construction.
Flexible Connectors with Differing Hose
and End Fitting Diameters
All end fittings are, by default, the same diameter as the hose.
If you require a flexible connector where the end fitting
diameter does not match the hose diameter, the size must be
indicated numerically in front of the corresponding fitting as in
the following example.
Example: FFUL15X18HMX2HM = Flexible connector with fixed end fittings, 1½"
hose diameter, 18" overall length, with one 1½" hex male fixed end fitting, and
one 2" hex male fixed end fitting.
126
MS90 = 90° with male swivel NPT
EZFFT = EZ Fit Tee
SSFF = Flat faced round flange (stainless steel only)
SSRF = Raised faced round flange (stainless steel only)
Note: Each EZ FIT union style coupling comes complete with couplers and gaskets.
Rules:
1) End fitting diameters can not be smaller than hose diameters.
2) Only one hose fitting per flexible connector can be of a different diameter
than the hose diameter.
3) End fitting diameter must only be one size larger than hose
(1" hose could use 1½" fitting, 1½" hose could use 2" fitting, etc.).
4) EZ Fit end fittings are available in 1", 2", and 3" only.
5) Additional end fitting types are available.
Please contact Customer Service with inquiries.
