FFS-0772 Forecourt Guide No 6 InteractiveSpreads - Flipbook - Page 50
FMP-LL3 DIGITAL PROBE (UNIVERSAL DEVICE PROTOCOL - UDP): W I R I N G
Black Wire
of Probe
Black Wire of
Field Cable
Red Wire
of Probe
End View of Splice
Red Wire of
Field Cable
White Wire Both Shield
of Probe
Wires
Before Crimp
To Console
To Probe
After Crimp
Note: If you are using a ground pin in the junction box to terminate the probe shield wire, you must also cut the shield
wire from the console cable.
LL3 EMULATION MODE: W I R I N G
Black Wire of
Field Cable
End View of Splice
Before Crimp
Red Wire
of Probe
Black Wire
of Probe
White Wire
of Probe
Red Wire of
Field Cable
Both Shield
Wires
After Crimp
To Console To Probe
Note: If you are using a ground pin in the junction box to terminate the probe shield wire, you must also cut the shield
wire from the console cable.
