FFS-0772 Forecourt Guide No 6 InteractiveSpreads - Flipbook - Page 26
FMP-LL3 DIGITAL PROBE (UNIVERSAL DEVICE PROTOCOL - UDP): W I R I N G
TSP-LL2 PROBE: W I R I N G
Black Wire
of Probe
Black Wire of
Field Cable
Black Wire of
Field Cable
End View of Splice
Red Wire
of Probe
End View of Splice
Before Crimp
Red Wire of
Field Cable
White Wire Both Shield
of Probe
Wires
Before Crimp
Red Wire
of Probe
Black Wire
of Probe
White Wire
of Probe
Red Wire of
Field Cable
Both Shield
Wires
After Crimp
To Console To Probe
To Console
To Probe
Note: If there is not a ground pin in the junction box you will need a fourth splice connector to connect the shield wires together.
After Crimp
Note: If you are using a ground pin in the junction box to terminate the probe shield wire, you must also cut the shield
wire from the console cable.
NOTES:
LL3 EMULATION MODE: W I R I N G
Black Wire of
Field Cable
End View of Splice
Before Crimp
Red Wire
of Probe
Black Wire
of Probe
White Wire
of Probe
Red Wire of
Field Cable
Both Shield
Wires
After Crimp
To Console To Probe
Note: If you are using a ground pin in the junction box to terminate the probe shield wire, you must also cut the shield
wire from the console cable.
51
