EN Catalog 2021-22 - Catalog - Page 52
302-040
ENTRY SEAL
These electrofusion entry seals weld directly to the walls of
polyethylene chambers or sumps. They have been specifically
designed to reduce the number of fittings necessary to provide
watertight seals between the underground tank sump/chamber
and the UPP® primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after
installation it becomes one with the sump, with zero leak paths,
creating a 100% leak tight system. The seals are polyethylene
based allowing electrofusion of UPP® pipework systems directly
to the penetration, negating the need for mechanical boots and
creating a homogeneous structure of the sump, boot and pipe.
HIGHLIGHTS
52
ORDER INFORMATION
•
•
•
Electrofusion seal for 40/32 mm pipe.
Model
Description
Diameter Ø (mm)
302-040 seal complements 32 mm pipe range.
302-040
Fusion seal
40
•
32 mm primary (single wall) continues through penetration
and into PE sump/chamber and is fusion sealed with
49-040-032 (ordered separately).
40 mm secondary (double wall) pipe welds directly to seal
spigot using 02.40(SC) fusion coupler.
