EN Catalog 2021-22 - Catalog - Page 35
UPP® ELECTROFUSION
PIPEWORK
FUEL/CHEMICAL COMPATIBILITY CHART TO EN14125:2013 (RETAIL SPECIFIC)
Automotive Fuels
• Gasohol (E1 to E10)
Premium Unleaded Gasoline
Regular Unleaded Gasoline
Premium Leaded Gasoline
Diesel
Bio-Fuels & Blends
• Ethanol 100% (Ethyl alcohol)
•
•
•
•
•
•
E85 - Ethanol 85% + Unleaded Fuel 15%
E70 - Ethanol 70% + Unleaded Fuel C 30%
ASTM Fuel C 100%
EN14125:2013 Fuel 1
EN14125:2013 Fuel 2
No.2 Fuel Oil
MTBE 10% + reference Fuel C 90%
MTBE 15% + reference Fuel C 85%
Toluene
AdBlue*
* Requires stainless steel transition fittings.
Ethanol 50% + reference Fuel C 50%
Ethanol 30% + reference Fuel C 70%
Ethanol 10% + reference Fuel C 90%
Biodiesel 10% to 100%
Methanol Mixtures
• Methanol 100%
•
•
•
•
•
•
•
•
•
•
PIPING &
CONTAINMENT
•
•
•
•
Test Fuels & Fuel Additives
• UL971 – MV, CT, HB, AM
Methanol 50% + Reference Fuel C 50%
Aviation & Marine Fuels
• Jet A1 (Avtur)
•
•
•
•
JP8 (F-34)
Methmix
Avgas
Kerosene
Methanol 15% + Reference Fuel C 85%
TRENCHES (WIDTH, DEPTH & FALL BACK)
It is important to construct proper trenches before laying
UPP® pipe. Trenches should be wide and deep enough to
comfortably allow pipe runs, recommended spacing, and
backfill materials.
Recommended burial depth of UPP® pipe is a minimum of
300 mm (12").
All trenches should be sloped back towards the storage tanks
with a recommended gradient of 1:100.
Vapour return lines must have a slope of 1:50 (1/4" per foot)
and never less than 1:100 (1/8" per ft) back towards the tank
farm, unless in-line joints such as elbows are to be used.
Trench corners should contain a radius suitable for the pipe work.
1:100 fall to tank
35
