EN Catalog 2021-22 - Catalog - Page 265
SPECIFICATIONS
Pump Motor Assembly
• Materials: Stainless steel construction including impellers/
diffusers, inlet/outlet, and outer shell
•
Pump type: All models are 5.1" (130 mm) outside diameter
centrifugal type pump
•
Power cable: 23' (7 m) black polyethylene jacketed
power cable
•
50 Hz pump motor: Three-stage pump with 2" BSPT
female outlet
•
Motor rating: Continuous operation with motor cooling
provided by product flow and protected from dry running.
Variable Length Range (A)
Minimum 6" (152 mm)
Diameter Pump Access
Recommended
(A)
Submersible Turbine Pump Kit
• All stainless steel hardware and Viton® or EPDM seals
•
Bypass relief valve cracking pressure of 30-40 psi (2.1-2.8
bar) and 4 gpm (15 lpm) minimum flow at the discharge of
all models
•
Non-return check valve cracking pressure of 3 psi (0.2 bar)
between product piping and bypass relief valve of
all models
•
Liquid compatibility: All models are intended for use with
Diesel Exhaust Fluid (DEF). DEF is a non-flammable,
non-combustible liquid that has a specific gravity of 1.09
at 68F (20C), and is made per ISO 22241-1
specifications with 32.5% urea and distilled or deionized
water. As defined by ISO 22241-1, DEF is the same as
AUS 32® (aqueous urea solution) and also commonly
known as AdBlue®
3" (76 mm)
bottom clearance typical
Bottom clearance typical
Model Length Range
71"–104"
(1,800 mm–2,640 mm)
104"–168"
(2,640 mm–4,265 mm)
DEF Pump Motor Performance
DEF-PMA150B (Single Phase) and DEF-PMA150C
(Three Phase)
Model Length Designation
VL1
VL2
40
35
Total Head in Meters
30
25
20
15
10
5
0
0
50
100
150
200
250
300
Flow in Liters per Minute (lpm)
Note: Performance is based on pumping water (1.00 specific gravity). Pressure
is taken at the discharge outlet of the pump motor .
SUBMERSIBLE
PUMPING SYSTEMS
265
