EN Catalog 2021-22 - Catalog - Page 24
UPP® SEMI-RIGID
PIPEWORK SYSTEM
Since its introduction over forty years ago, as the world’s
first electrofusion pipework system for fuel applications,
UPP® semi-rigid pipework has become known globally
as the standard for liquid tight pipework systems. UPP®
pipework utilises the advanced electrofusion welding
process to effectively bond system components together
into one leak proof system.
HIGHLIGHTS
SPECIFICATIONS
•
UPP® EN14125:2013 Standard Primary Pipe
• Material: PE100 with EVOH resin barrier
•
UPP® pipe features an innovative clear inner lining made
of natural EVOH resin to provide maximum pipe strength
and superior vapour permeation and hydrocarbon
barrier qualities.
UPP® pipe is the first to receive an exception Class T1
temperature rating with its EN14125 approval, a true
testament to its strength.
•
•
Primary pressure rating (bar/psi): 10/145
•
Temperature rating: Class T1 Rating (EN14125:2013)
-40 °C to 50 °C
Primary vacuum rating (-bar/"Hg): -0.9/-26.6
Primary colour: Black with two clusters of four green
stripes, clear inner liner
•
The end of a piping run can be fitted with a wide variety of
termination fittings to accommodate any application.
•
•
Fittings are specifically designed to eliminate the number
of bolt holes, rubber seals, band clamps and any potential
leak paths.
UPP® EN14125:2013 Standard Fill Pipe
• Material: PE100 with EVOH resin barrier
•
The UPP® electrofusion welding process is safe and
simple to complete in any climate and virtually any
weather condition.
•
An installer simply prepares the components, fits them
together attaching welder leads to the fitting, and then
presses a single button on the welding unit to initiate
the process.
•
The welder unit itself calculates the exact settings
required to complete the weld, regardless of the pipework diameter or temperature, leaving no settings for the
installer to input.
•
•
Primary pressure rating (bar/psi): 6/87
•
Temperature rating: Class T1 Rating (EN14125:2013)
-40 °C to 50 °C
Primary colour: Black with two clusters of four green
stripes, clear inner liner
UPP® EN14125:2013 Standard Coaxial (Secondary) Pipe
• Material: PE100 with EVOH resin barrier
•
•
•
•
•
Primary pressure rating (bar/psi): 10/145
•
•
Primary vacuum rating (-bar/"Hg): -0.9/-26.6
Primary colour: Black with four green stripes, clear inner liner
Secondary colour: Black with six green stripes
Secondary pressure rating (bar/psi): 5/72
Temperature rating: Class T1 Rating (EN14125:2013)
-40 °C to 50 °C
Secondary vacuum rating (-bar/"Hg): -0.6/-17.8
UPP® EN14125:2013 Standard Secondary Sleeve
• Material: PE100
24
•
•
•
Secondary pressure rating (bar/psi): 5/72
•
Primary vacuum rating (-bar/"Hg): -0.6/-17.8
Primary colour: Black with six green stripes
Temperature rating: Class T1 Rating (EN14125:2013)
-40 °C to 50 °C
