EN Catalog 2021-22 - Catalog - Page 233
ORDER INFORMATION CONTINUED
Alcohol-Gas (AG) 1½ Hp Fixed Speed Submersible Turbine Pumps
Alcohol-Gasoline Model
Description
Model Length Range Number
Model Length* Range
STPAG150B-VL1
1½ hp AG fixed speed, single-phase
VL1
1556 mm—2298 mm
STPAG150B-VL2
1½ hp AG fixed speed, single-phase
VL2
2344 mm—3905 mm
STPAG150B-VL3
1½ hp AG fixed speed, single-phase
VL3
3156 mm—5499 mm
STPAG150C-VL1
1½ hp AG fixed speed, three-phase
VL1
1531 mm—2273 mm
STPAG150C-VL2
1½ hp AG fixed speed, three-phase
VL2
2318 mm—3879 mm
STPAG150C-VL3
1½ hp AG fixed speed, three-phase
VL3
3131 mm—5473 mm
Notes:
1. STP models are compatible with fuel mixtures containing up to 10% ethanol
with gasoline, up to 5% biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or
17% TAME with gasoline. STPAG models are compatible with fuel mixtures
containing diesel fuel with up to 20% biodiesel, 100% biodiesel, up to 85%
ethanol with gasoline, and 20% MTBE, 20% ETB, or 17% TAME with gasoline.
3. All 150B models require single-phase, 200-250 VAC, 50 Hz incoming power.
All 150C models require three-phase, 380-415 VAC, 50 Hz incoming power
2. All models are supplied with a standard check valve unless factory option "R"
or "W" is specified.
*Model length (A) defined as the dimension from turbine manifold bottom to
pump motor inlet.
4. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
5. For riser pipe lengths 787 mm to 1524 mm, additional charge applies (call
customer service for lead times).
Factory Installed Approvals
May specify one in model number at time of STP order.
Model
Description
(ATXF)
Submersible turbine pumps with ATEX flameproof approval for EN markets
(RT)
Submersible turbine pumps with ROSTEST approval for Eastern European markets
Note: If not otherwise specified, all models are supplied to UL approval as standard.
Consult Factory for other local approvals..
Factory Installed Options
Specified in model number at time of STP order.
Model
Description
F
Floating suction adapter, 1½" NPT female, must be factory installed
H
High pressure 3.1 bar deadhead output
K
IFS (intake filter screen) factory assembled to pump motor assembly
R
Model R check valve, factory installed, for Veeder Root™ PLLD Line Leak
W
Model W check valve, factory installed, for Red Jacket™ PPM4000 Line Leak
Field Installed Options
1½ hp fixed speed specific accessories.
Description
400137937
Syphon check valve, alcohol-gasoline compatible
5800100215
STP-SCI, single-phase smart controller
400818922
STP-CBBS, single-phase control box with lockout switch, 240 Volt coil
402312922
STP-DHIB-SCI, combo DHIB with factory wired STP-SCI
402313922
STP-DHIB-CBBS, combo DHIB with factory wired STP-CBBS
402459931
Model 65 PSI (4.5 bar) relief check valve (AG compatible for slave of manifolded STPs with Veeder Root™ PLLD)
402507930
Secondary syphon kit (when two syphon primes are required for one STP)
5800103300
STP-SCIIIC, three phase 380-415 VAC smart controller
401220965
STP-CBB3C, three-phase 380-415 VAC magnetic starter
5800300200
STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
SUBMERSIBLE
PUMPING SYSTEMS
Model
*When purchasing STP-SCI or STP-DHI-SCI in equal quantities of fixed speed 4" STPs, the STP-SCI or STP-DHI-SCI will be invoiced at special discount pricing.
Veeder-Root is a trademark of Danaher Corporation
Red Jacket is a trademark of Veeeder-Root Company
233
