EN Catalog 2021-22 - Catalog - Page 12
CORROSION CONTROL™
WATER SEPARATOR
The Corrosion Control™ Water Separator provides proactive
in-tank corrosion control by removing tank-bottom corrosion
contributors including water and acid. The Water Separator
uses the flow of fuel created by a 4" FE PETRO® Submersible
Turbine Pump (STP) to generate a vacuum which suctions
the tank bottom. The separator vessel collects any water/
acid mixture and the clean fuel is directed back into the
tank. The water/acid mixture is then removed by a service
technician, keeping the tank clear of the harmful corrosioncausing mixture.
HIGHLIGHTS
• Compatible with any new or existing FE PETRO® 4" STP.
• Mounts to any 4" riser including either an STP riser or
probe riser.
• Element-free vessel has no filter to change, eliminating
ongoing replacement costs.
• All stainless steel construction for corrosion resistance.
• Comprised of UL recognized components.
• Height adjustable tank bottom suctioning kit can
accommodate tanks up to 10 feet (3 meters) in diameter.
• Automated control and monitoring is provided via an
EVO™ 600/6000 Series Automatic Tank Gauge (ATG).
• The ATG runs the Water Separator for 45 minutes after each
delivery as well as once a day during a non-peak time to
remove any water/acid mixture that drops to the tank bottom.
• During scheduled operation, the ATG opens the Water
Separator’s solenoid valve to allow fuel to begin flowing
through the separator vessel while a flow switch monitors
the system for positive flow.
• An integrated LL3 Probe monitors separator operation and
provides a notification to empty the vessel via the ATG.
SPECIFICATIONS
• Vessel capacity: 3/4 gallon of water/acid
• Eductor flow: 8 GPM flow to drive suction pickup
• Suction pickup: 1/4 GPM
Containment Sump Requirements
• Minimum of 37" (0.94 meters) of height inside the tank sump.
• Accessible 4" port in the tank manway.
• At least 11" (280mm) envelope for vessel and adjacent piping.
• High-voltage conduit for solenoid wiring.
• Intrinsically safe conduit for Water Separator probe.
Automatic Tank Gauge Requirements
• EVO™ 600 or EVO™ 6000 ATG.
• Access to in-tank product level readings (for delivery
events and recirculation runtime).
• 1 open relay module port (for solenoid).
• 1 open probe module port (for vessel probe).
SYSTEM
COMPONENTS
Add these Corrosion Control™
System items to your site
to proactively prevent and
detect corrosion.
12
EVO™ 600 or
EVO™ 6000 ATG
CORROSION
DETECTION SENSOR
MULTIPLEXING
SENSOR HUB™
DESICCANT
PACK
ADVANCED
PROTECTION STP
