INNOVATIONS@FATH 21|OCT EN - Catalog - Page 36
SOLUTIONS FOR INDUSTRIAL ECOSYSTEMS
Directly dimmable LED lamp
High light quality and energy-saving operation
In the directly dimmable variant of the LED lamp, the on/off function
as well as the dimming are controlled using the dimming button on
the input side of the lamp. The last light intensity setting is saved and
automatically retrieved the next time the device is switched on.
Thanks to the conical prism disc, FATH LED Lamps provide the workstation with a uniform, glare- and flicker-free luminous flux in workplace-friendly neutral white. They consume significantly less electricity than conventional lights and are virtually maintenance-free
thanks to the long service life of up to 100,000 hours for modern
LEDs.
Remote switching via the power strip
If you connect a FATH Power Strip to an LED lamp, you can remotely
switch off the lamp using the large switch on the power strip. The
power to the outlets can be disconnected by the switch but will still
continue to flow through to the LED lamp. Even though the outlets
are deactivated, the light supply is not affected. If several lights are
connected in series on a single power strip, all the lights can be
switched on and off with a single click of the switch. If directly dimmable LED lights are used, each light is dimmed as needed.
Convenient remote dimming via the power strip
If the LED lamp is connected to a FATH Power Strip that has a dimming button at the output, the light intensity can be adjusted by
pressing the dimming button. Each employee can easily adjust the
required light intensity for each visual task – regardless of their
height and work position. The on/off function for the LED lamp is integrated in the dimming button. One particularly clever feature: In
this variant, the dimming strength is stored in the lighting electronics
and controlled via a signal from the power strip.
Multiple assembly tables
USB for media use at the workplace
If two assembly workstations are to be supplied with power and
light during production, you can, for example, equip both workstations with one LED lamp each and two power strips and connect
all six modules with cables. The power is then supplied from one
side in series. For example, if you use two 40-watt LED lamps, a
total of 3,420 watts of power remains for the outlets.
FATH Power Strips F Line are also available in a version with an
integrated USB port. This means, for example, that tablets for
providing information can be operated or charged directly via
SMART-IC on the permanently installed power infrastructure –
without a power supply unit.
With the FATH solution for light and electricity, two facing work tables can be supplied compactly and at the same time with enough
outlets for the power consumers.
36
©2021 | fath24.com
