Catalog | FATH Engineering Components 20.1 | EN - Catalog - Page 766
SINGLE & COMBINED
USE
Directly dimmable LED lamp
Multiple assembly tables
In the directly dimmable variant of the LED lamp, the on/off function
as well as the dimming are controlled using the dimming button on
the input side of the lamp. The last light intensity setting is saved
and automatically retrieved the next time the device is switched on.
If two assembly workstations are to be supplied with power and light
during production, you can, for example, equip both workstations
with one LED lamp each and two power strips and connect all six
modules with cables. The power is then supplied from one side in
series. For example, if you use two 40-watt LED lamps, a total of
3,420 watts of power remains for the outlets.
Remote switching via the power strip
With the FATH solution for light and electricity, two facing work tables can be supplied compactly and at the same time with enough
outlets for the power consumers.
If you connect a FATH Power Strip to an LED lamp, you can remotely
switch off the lamp using the large switch on the power strip. The
power to the outlets can be disconnected by the switch but will still
continue to flow through to the LED lamp. Even though the outlets
are deactivated, the light supply is not affected. If several lights are
connected in series on a single power strip, all the lights can be
switched on and off with a single click of the switch. If directly dimmable LED lights are used, each light is dimmed as needed.
Convenient remote dimming via the power strip
USB for media use at the workplace
FATH Power Strips F Line are also available in a version with an
integrated USB port. This means, for example, that tablets for
providing information can be operated or charged directly via
SMART-IC on the permanently installed power infrastructure –
without a power supply unit.
If the LED lamp is connected to a FATH Power Strip that has a
dimming button at the output, the light intensity can be adjusted
by pressing the dimming button. Each employee can easily adjust
the required light intensity for each visual task – regardless of their
height and work position. The on/off function for the LED lamp is
integrated in the dimming button. One particularly clever feature: In
this variant, the dimming strength is stored in the lighting electronics and controlled via a signal from the power strip.
High light quality and energy-saving operation
Thanks to the conical prism disc, FATH LED Lamps provide the
workstation with a uniform, glare- and flicker-free luminous flux
in workplace-friendly neutral white. They consume significantly
less electricity than conventional lights and are virtually maintenance-free thanks to the long service life of up to 100,000 hours for
modern LEDs.
762
