Catalog | FATH Engineering Components 20.1 | EN - Catalog - Page 709
SOLUTIONS FOR INDUSTRIAL ECOSYSTEMS
Engineering Components | Components Work Station | Information Provision
SYSTEM ARM I40L 370 (SET)
MODEL pre-assembled, profile 40 and up
DESCRIPTION Stable pivot arm with a reach of approximately 370 mm and various connection options; pivotable 360°;
pre-assembled
System arm can be attached lateral, transverse, or on the face of the profile; if attached on the front
face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)
MATERIAL Arm: Aluminum
Housing: Aluminum die-cast
Cover ring: Plastic
Inserts: Steel
Friction shaft: Steel
Cover caps: Plastic
Screws: Steel
Washers: Steel
Centering plates: Aluminum die-cast
T-slot nuts: Steel
Monitor mount: Plastic PA, glas fiber reinforced
SURFACE Arm: Anodized
Housing: Powder coated
Screws: Zinc plated
Washers: Zinc plated
Centering plates: Powder coated
T-slot nuts: Zinc plated
COLOR Arm: Alu color
Housing: Alu color
Cover ring: Gray ≈ RAL 7042
Cover caps: Gray ≈ RAL 7042
Centering plates: Alu color
Monitor mount: Black
MAX. LOAD 17 kg
SET 1 1 system arm I40L 370 with end friction joint
2 cover caps
2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side),
2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side),
2 washers 8-FSt,
2 centering plates,
2 T-slot nuts - slot 8 - M8
SET 2 1 system arm I40L 370 with end friction joint
1 cover cap
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 25 (for T-slot nut end side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 30 (for core hole end side),
2 washers 8-FSt,
2 centering plates,
2 T-slot nuts - slot 8 - M8
SET 3 1 system arm I40L 370 with double friction joint
2 cover caps
2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side),
2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side),
2 washers 8-FSt,
2 centering plates,
2 T-slot nuts - slot 8 - M8
SET 4 1 system arm I40L 370 with monitor mount
1 cover cap
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side),
1 washer 8-FSt,
1 centering plate,
1 T-slot nut - slot 8 - M8
1 assembly set for monitor: 4 screws DIN EN ISO 4762 (DIN 912) - M4 x 12, 4 washers
PACK QUANTITY 1 piece
705
©2024 | fath24.com
