Catalog | FATH Engineering Components 20.1 | EN - Catalog - Page 597
SOLUTIONS FOR INDUSTRIAL ECOSYSTEMS
Engineering Components | Connecting Systems | Pivot Joints
END FRICTION JOINT B45-B45L FOR SYSTEM ARM (SET)
MODEL 45 to 40 mm modular dimension
DESCRIPTION Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°;
End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right
angles to the profile;
Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the
front face, the core hole of the respective profile must be M8 threaded (min. 20 mm deep)
MATERIAL Housing: Aluminum die-cast
Cover ring: Plastic
Inserts: Steel
Friction shaft: Steel
Cover caps: Plastic
Screws: Steel
Washers: Steel
Centering plates: Aluminum die-cast
T-slot nuts: Steel
SURFACE Housing: Laquered
Centering plates: Laquered
Screws: Zinc plated
Washers: Zinc plated
T-slot nuts: Zinc plated
COLOR Housing: Alu color
Cover ring: Gray ≈ RAL 7042
Cover caps: Gray ≈ RAL 7042
Centering plates: Alu color
SET 1 end friction joint
1 cover cap,
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 25 (for T-slot nut end side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side),
1 screw DIN EN ISO 4762 (DIN 912) - M8 x 30 (for core hole end side),
2 washers 8-FSt,
1 centering plate - slot 10 - 45 x 45,
1 centering plate - slot 10 - 40 x 40,
2 T-slot nuts - slot 10 - M8
PACK QUANTITY 1 set
B2
MA max.
N
B1
N
R
112
30
W
W [Nm] MAmax [Nm]
R [mm]
B1 [mm]
B2 [mm]
N
Weight [g] Profile
Part #
0.5
45.0
3.0
45
40
10
761.2
B
061FAZ4540LN10
3.0
45.0
3.0
45
40
10
771.7
B
061FAN4540LN10
6.0
45.0
3.0
45
40
10
773.2
B
061FAS4540LN10
9.0
45.0
3.0
45
40
10
774.6
B
061FAM4540LN10
12.0
45.0
3.0
45
40
10
776.1
B
061FAB4540LN10
15.0
45.0
3.0
45
40
10
777.6
B
061FAL4540LN10
593
©2024 | fath24.com
