Catalog | FATH Engineering Components 20.1 | EN - Catalog - Page 1014
CABLE GUIDES
FLEXIBLE IMPLEMENTATION
Cable Binder Block
Flexibility for more or less cables
The cable binder block is a solution for cable guides that run lengthwise to the aluminum profile. The block is mounted by a quarter
turn in the slot.
Perfect order without cable tie and hook and loop tape: Clip Cable
Binders and Snap-cable-binding from FATH
NOTE: If you want to lay cables directly in the slot, you can close the
profiles with the FATH cover profiles and thus optimally protect the
cables.
Cross Cable Binder Block
The cross cable binder block is suitable for both lengthwise and
crosswise running cables. Also with this solution, the block is
mounted in the slot profile by a quarter turn.
Clip Cable Binder
If clip cable ties are used, no more cable ties or hook-and-loop tapes
are needed. The re-closable clip cable binders can be attached to
the aluminum profile with a quarter turn using a slot hammer. The
clip cable binders are available as a version with one chamber or
with two chambers, the latter including clamping ring to prevent
cables from slipping.
Hook-and-Loop Blocks
Hook-and-loop blocks allow cables and lines to be added and removed. With the special slot hammer 45° the hook-and-loop blocks
can be mounted lengthwise or crosswise to the slot. The hook-andloop blocks can also be easily mounted by turning them an eighth of
a turn in the slot. The hook-and-loop tape is included in the delivery.
Universal Cable Binding Block
If fixation in a slot profile is not desired, screw-on solutions for cable
fixation are available. However, they are also used if the fixing point
is to be screwed into the slot. The universal cable fixation blocks are
available as versions for cable ties, hook-and-loop tapes or as clip
cable binders.
Snap-cable-binding
This special solution from FATH for cable mounting provides four
defined snap-in cable slots. The special plug-in geometry accepts
different cable diameters and at the same time provides strain relief for the cables. Optional cover caps with hooks close the cable
fixation securely. In addition to slot hammers for aluminum profiles,
there are versions with snap hammers for fixing in holes of panel
elements or metal sheets.
Get to know it
better now!
cable-fixation.fath24.com
1010