BOARD GUIDE 2023 FINAL NEW ON SITE - Flipbook - Page 64
DRYWALL
PRODUCTS
Super Drywall Screws
(Evoshield® Coated)
2002/95/C
Designed For:
Mechanical fastening1
of drywall and cementitious
boards2 to mild steel
structural framing or
partitioning systems3
Head Style:
Bugle head with
undercutting ring.
Recess type:
Phillips No. 2 female
recess.
Material Grade:
SAE C1020 (hardened > 55
HRC).
Coating:
1,000Hr EvoShield®
PRODUCT RANGE/ USABILITY DATA
CODE
SIZE/NOM.
LGTH (mm)
BOX
CARTON
DRILL
CAP
(mm)
EVUTK 4.8-38-3
4.8 x 38
200
2,800
1.2-3.5
EVUTK 4.8-50-3
4.8 x 50
100
2,400
1.2-3.5
EVUTK 4.8-75-3
4.8 x 75
100
2,400
1.2-3.5
Technical Data
Characteristic Withdrawl Resistance4,5, NRk , From
S355JR Mild Steel6
KEY POINTS
Nominal
Diameter
(mm)
Tested in up to 4.0mm steel.
4.8mm diameter to allow
exterior sheathing boards to
be fastened.
1.2mm 1.5mm 2.0mm
3.0mm
4.0
1,380
6,230
8,650
4.8mm
2,060
3,230
Characteristic4 Mechanical Properties
1,000hr Evoshield® coating
guarantees superior
corrosion resistance
The head gives a very clean
cut countersink where paper
faced boards in particular
can suffer from burring.
1.
2.
3.
4.
64
Nominal Substrate Thickness, t¬nom (mm)
5.
6.
Characteristic
Symbol
Magnitude
Unit
Characteristic tensile
capacity, 7
Fult,Rk
14,030
N
Characteristic shear
capacity,
Vult,Rk
8,740
N
Characteristic torsional
capacity,
Tult,Rk
8.90
N
Mechanical fasteners pursuant to BS EN 14566: 2008 & A1: 2009,
Metal components pursuant to BS EN 14195: 2014,
Gypsum plasterboard pursuant to BS EN 520: 2004 & A1: 2009 and fibre
reinforced boards pursuant to BS EN 15283-1: 2008 & A1: 2009 and BS EN 15283-2: 2008,
Characteristic loads specifically refers to the mean result from empirical tests minus
two standard deviations and rounded down to the nearest 10N in accordance with EAD
330047-010602 and UKAS Document M3003,
Derived from empirical testing pursuant to BS EN 14566: 2008 & A1: 2009,
Mild hot-rolled steel pursuant to BS EN 10025-2: 2019,