BOARD GUIDE 2023 FINAL NEW ON SITE - Flipbook - Page 57
DRYWALL
PRODUCTS
Under Cutting
Drywall
PRODUCT RANGE/ USABILITY DATA
CODE
SIZE/NOM.
LGTH (mm)
BOX
CARTON
DRILL
CAP
(mm)
EVUCD35
3.9 x 35.0
1,000
10,000
0.6-1.2
EVUCD45
3.9 x 45.0
500
7,500
0.6-1.2
Designed For:
Fixing plasterboards with thick
paper fascia to metal studs
(0.5mm to 1.0mm) or timber
Head Style:
Undercutting ring
Drive Bit:
Phillips No. 2
Drill Point:
Sharp point
Material Grade:
SAE C1022 carbon steel (hardened min. 55HRC)
Coating:
5µm manganese phosphate
Shank material:
Carbon steel
Thread form:
Fine (twin starting)
Technical Data
Withdrawal Resistance: Characteristic Loads in
Steel Substrates (kN)
Nominal
Diameter
Steel Thickness
0.5mm 0.7mm 1.0mm
3.9mm
KEY POINTS
Bugle head with
undercutting ring for
application versatility gives a flush
countersink finish with no paper
tearing or burring,
Thread configuration
ensures clean, smooth, low torque
installation for
maximum holding power,
Super sharp point dimples steel at
point of contact; providing
wobble-free and quicker
installation.
0.80
1.10
1.60
1.2mm
1.80
Withdrawal Resistance: Safe Working Loads in
Steel Substrates (kN)
Nominal
Diameter
Steel Thickness
0.5mm 0.7mm 1.0mm
3.9mm
0.33
0.46
0.53
1.2mm
0.60
Withdrawal Resistance: Timber Substrates (kN)
Nominal
Diameter
Embedment
Depth
(mm)
Timber
Grade
Characteristic
Load
(kN)
3.9mm
15.0 (min)
C16
2.2
Mechanical Properties
Characteristic
Tensile Capacity
Characteristic
Shear Resistance
6.50 kN
2.20 kN
57