100%
ORiGINAL 2.4 - Flipbook - Page 91


Technical Speci昀椀cations
ORiGINAL® 44mm Door
> Grained GRP skins are available in a wide
variety of styles and colours including wood stains
> Stiles and Rails are manufactured from a
water-resistant polymer
> The key material components of an ORiGINAL foam
昀椀lled door is sustainably sourced LVL, recycled PVC
and foam.
> Superior heat and sound insulation
> Complimentary choice of grained reglazeable
cassettes
> Doors meet the test standard for PAS:24
and Secured by Design
Glass
All the double and triple glazed units used in our doors
are manufactured to the highest standard and come with
internationally recognised accreditations for performance,
strength and thermal ef昀椀ciency.
High Performance Secure Units
All units are made laminated to comply with Document
Q. All units are manufactured to the EN1279 standard for
quality of seal and life expectancy
Thermally Ef昀椀cient
All the clear or obscure glass units in our range have
insulating features as standard. They are manufactured
using low emissivity glass and the airspace is 昀椀lled with
Argon gas to give industry leading thermal ef昀椀ciency.
In addition, we only use warm edge spacer systems.
> Q-Marked with full manufacturing traceability
Care and Maintenance
Your new door should keep you safe and secure for years to
come however with all products and especially those that
are exposed to the elements we recommend that you carry
out a care and maintenance routine.
> Door frames should be washed with warm
soapy water.
> External glass should be cleaned with warm soapy
water and cleaned with a proprietary glass cleaner.
> Maintenance of the door may be required to maintain
any guarantees from the installer. Hinges should be
lubricated with engineering oil. Cylinders can be
lubricated with Te昀氀on-based products only, as other
oils may cause degradation. If necessary, a small
amount of lubricant can be applied to the moving
parts such as letterplates, handles and knockers.
> The door leaf should only be cleaned using warm
water or non-aggressive composite door wipes.
No solvent-based product or abrasives should be
used as these will damage the surface of the skin.
91
Powered by
Paperturn flipbook
Page 90 of 92
Print

Print

Download as PDF
