2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 474
PIT EQUIPMENT •
Pair from
Pair from
4
5
£199.52
5 • Vehicle Service Ramps
4 • Wheel Cribs
R A MPS
Pair from
Wheel Cribs are a lightweight and
safe alternative to axle stands. The
concave top cradles the tyre to
provide a stable platform whilst you
work under the car. Each crib can
support 1500lb (682kg) weight so a
set of four is suitable for a vehicle up
to 6000lb (2727kg). Sold in pairs.
Dimensions: 15” long x 8” high x
12” wide.
(RR-WC-8) £199.52
Dimensions: 15” long x 10” high x 12”
wide
(RR-WC-10) £211.66
Dimensions: 15.75” long x 12” high
x 12” wide. (RR-WC-12)
£240.01
£411.17
1
These vehicle service ramps from Race Ramps are extremely lightweight
and durable and are the perfect solution for replacing heavy steel ramps.
The unique construction is designed to not slide on garage floors or dig
into asphalt driveways and they can also be used on grass or dirt. They are
completely weatherproof and will not rust unlike traditional steel ramps.
40” Sport Ramps - Ideal for smaller sports cars with narrower tyres
(up to 8”) and low ground clearance.
Dimensions: 40” long x 7” high x 10” wide. 16 degree incline.
3000lb (1363kg) capacity per pair.
(RR-40)
£195.46
56” Race Ramps - For low ground clearance cars with up 10” wide tyres.
Dimensions: 56” long x 8” high x 12” wide. 10.75 degree incline.
3000lb (1363kg) capacity per pair.
(RR-56)
£354.46
2 Piece Version
(RR-56-2)
£398.00
67” Race Ramp XT - For low ground clearance cars with wide tyres
(up to 12”).
Dimensions: 67” long x 10” high x 14” wide. 10.75 degree incline.
3000lb (1363kg) capacity per pair. (RR-XT)
£475.98
2 Piece Version
(RR-XT-2)
£551.94
1 • Trailer Ramps
The ideal solution if your original trailer/transporter ramp is not long enough.
Trailer ramps can reduce the angle of approach to as little as 4 degrees making
them ideal for low race cars. Constructed from a composite material they are
lightweight and robust and completely weatherproof. They are designed not to
slip on hard surfaces such as concrete or tarmac and can also be used on grass
or dirt surfaces. Sold in pairs
46” long x 4” high x 14” wide. 5.5° incline (2” step)
(RR-TR-4)
£411.17
67” long x 5” high x 14” wide. 4° incline (2” step)
(RR-TR-5)
£484.09
45” long x 6” high x 14” wide 7.8° incline (2” step)
(RR-TR-6)
£424.33
74” long x 7” high x 14” wide. 5.2° incline (2.5” step)
(RR-TR-7)
£588.40
74” long x 7” high x 5.2” incline (1” step)
(RR-TR-7-TT)
£601.57
Set of 4
Pair
6
£281.54
12
The rally service ramps are an ideal alternative to heavy aluminium ramps.
Used to provide extra ground clearance for rally cars to enable a trolley jack
to be put into position. The ramps provide 3” extra ground clearance and are
14” wide so are suitable for even the widest rally car tyres. Fitted with a carry
handle for easy transportation. Sold in pairs.
Dimensions: 36” long x 3” high x 14” wide.
(RR-TM-FRT)
£281.54
12 • Flatstoppers
Vehicle Storage Aid
7 • Heavy Duty Trailer Ramps
Constructed from a heavy-duty composite material, they are lightweight,
robust and completely weatherproof. They are designed to not slip on hard
surfaces such as concrete or tarmac and can also be used on grass or dirt
surfaces. Extenders are also available to make loading onto a flatbed tow
truck even safer for vehicles with particularly low ground clearance, by
providing a 4° approach incline.
Dimensions: 42” long x 4.5” high x 10” wide. 5,2° approach incline
Capacity: 2500lbs (1100kg) per ramp
Weight: 15lbs (6.8kg) per ramp
(BT-TT-7-10)
£514.47
2-piece version
(BT-TT-7-10-2))
£564.09
8 Extenders
(BT-TT-7-EX-10)
£239.00
Pair from
3
£155.96
£217.73
£239.00
8
These portable pit stop ramps are designed for both home mechanics and
professional racers alike. The modular system assembles to provide a full
length drive on platform which at 14” high gives easy access to the underside
of the vehicle and because it is modular, it can be easily stored or transported
to and from race meets. Once the car is driven onto the platform the middle
section can be removed allowing for much better access to the vehicle
underside.
Dimensions: 220” long x 14” high x 16” wide. Weight - 240lb (109kg)
Standard model - Has a completely flat platform and is ideal for vehicle
inspection or service work.
(RR-PPS) £3219.47
Racers Model - Has cut outs to accept 15”x15”x2.5” corner weight scales.
Also includes spacers for if scales are not being used. (RR-PPS-R) £3915.23
Set of 4
13
Pair from
7
£3219.47
2 • Portable Pit Stop Ramp and Scale Platform
£295.72
6 • Rally Service Ramps
from
2
£242.04
Each
14
Pair
Set of 4
9
Flatstoppers from are perfect for
when your pride and joy is garaged
for the winter (or longer). They
prevent the tyres from developing
a flat spot from being stood for
long periods by supporting a larger
portion of the tyre in the concave
depression. Suitable for all cars with
a tyre diameter from 25”-30” and 12”
wide. Set of 4
(RR-FS) £295.72
13 Same as above but 10” wide
(RR-FS-10) £217.73
10
3 • Trak-Jax Jack Clearance Ramps
Provides extra height to enable a trolley jack to be positioned under cars with
low ground clearance. Ideal for tarmac spec rally cars or saloon racers. It
removes the necessity for expensive low profile trolley jacks. Available with or
without a 1.5” high wheel stop.
Dimensions: 30.1” long x 3” high x 12” wide. 7.8° incline. Pair
With wheelstop
(RR-TJ-S)
£155.96
Without wheelstop (not shown).
(RR-TJ)
£155.96
£25.32
£155.96
9 • Scale Ramps
Designed to allow a vehicle to be driven or pushed onto a 2.5” high corner
weight scale pad. The composite construction means they are ultralightweight and robust while the textured surface prevents slip on concrete
or painted floor surfaces. A simple run on ramp with no roll off platform.
Dimensions: 14” long x 2.5” high x 12” wide.
Weight: 3lb (1.36kg) Per ramp’ Set of 4
(RR-SCALE) £242.04
10 Longer version with a 12” long platform to allow the car to be rolled off
and back onto the scales.
Dimensions: 30” long x 2.5” high x 12” wide.
Weight: 4lb (1.82kg) per ramp. Sold in pairs
(RR-SCALE-2) £155.96
14 • Wheel Chock
These wheel chocks are suitable
for use with any of the Race Ramps
range providing additional safety.
Constructed from solid rubber with
a highly grippy base.
Each
(RR-WC-1) £25.32
Pair from
11 • Rack Ramps For 4 Post Lifts
474
£195.46
As 8 but either use with standard ramps or for lifts with no ramps.
RACK 4 Suitable for use with 4 post lifts that have a permanently attached
ramp. A notch on the front edge accommodates the original ramp and with the
rack ramp the run on angle is decreased.
Spec: 27.5” long x 4” high x 14” wide. 9° incline
Weight: 10lb (4.55kg) each ramp.
(RR-RACK-4) £242.04
RACK 5 - For 4 post ramps that have no run on ramp.
A lip on the front edge bridges the gap between the Rack Ramp and lift
platform.
Spec: 40” long x 5.75” high x 14” wide. 8° incline
Weight: 10lb (4.55kg) each ramp.
(RR-RACK-5) £405.09
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
ALL PRICES PLUS VAT
11
£242.04
