2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 440
CAR PREPARATION •
• Small Head Bracket
26
For Dzus fasteners. Pack of 10
1 Without Spring (19340) £11.09
2 With Spring
(19350) £40.09
1
• Quick Fastener
Mounting Brackets
FASTE N E RS
£1.02
10
from
6
£5.49
3
Steel brackets to fix to any convenient part
of your car to provide an instant fixing point
for fasteners.
Packs of 10. Except where stated.
To suit springs with;
3 1” (25.4mm) hole spacing(71550) £12.85
4 Recessed plate for 13/8” (35.052mm) hole
spacing. Sold each.
(PAN8200) £1.97
5 1” (25.4mm) or 13/8” (35.052mm) hole
spacing
(71551) £16.78
6 1” (25.4mm) or 13/8” (35.052mm) hole
spacing. Right angle plate (71552) £38.45
7 Fast mount bracket.
Suitable for 1” (25.4mm) spring spacing,
max size 63 x 40 x 44mm
2 pack
(71555) £16.63
8 Alloy, as per item 7.
2 pack
(71556) £15.06
9
2
27
• DZUS Fasteners
26 Overall head size 37mm, with
27mm between rivet holes.
5
4
Material Overall
Depth
Length
(approx)
(approx)
Part No.
3mm
13mm (EHF5-40)
4mm
15mm (EHF5-45)
5mm
16mm (EHF5-50)
6mm
17mm (EHF5-55)
8mm
18.5mm (EHF5-60)
9mm
20mm (EHF5-65)
11mm
21mm (EHF5-70)
14mm 24.5mm (EHF5-85)
Packs of
10 from
£12.85
Part No.
(EHF6-50)
(EHF6-60)
(EHF6-65)
(EHF6-70)
(EHF6-75)
from
£7.02
13
£2.66
14
• 14 Standard Head
Without D Ring
• 13 Panex Range
D Ring Fasteners
Length
of stud
12mm
14mm
18mm
*Approx
Material
Part
depth*
No
9mm
(316412190)
11mm (316414190)
15mm (316418190)
Length Material
Part
of stud depth*
No
13mm 10mm (316113190)
15mm 12mm (316115190)
17mm 14mm (316117190)
*Approx
Price
each
£7.02
£7.02
£7.02
28
£6.39
50% lighter than the Dzus Fastener steel
equivalent. Swapping to these is an easy way to
save weight on any race car. Sizing is the same as
Dzus fasteners so changing is like for like.
Material Depth Overall
(approx.)
Length
3mm
13mm
4mm
15mm
5mm
16mm
6mm
17mm
8mm
18.5mm
9mm
20mm
11mm
21mm
12mm
23mm
15mm
28mm
11
Price
each
£7.17
£7.17
£7.17
£9.63
£9.63
from
28 • Lightweight Aluminium
1/4 Turn Quick Release Fastener
12
standard head and ‘D’-ring fastener.
(336300190) £1.02
10 Rivet type receptacle plate
(336400190) £1.02
11 Retainer washer steel
(326101190) £0.15
12 Retainer washer plastic
(326100040) £0.15
Material Overall
Depth
Length
(approx)
(approx)
4mm
16mm
5mm
18.5mm
6mm
20mm
7mm
21mm
8mm
23mm
8
7
£1.02
9 Clip on receptacle plate to suit
27 Overall head size 44mm, with
34mm between rivet holes.
Price
each
£5.49
£5.49
£5.49
£5.60
£5.64
£6.58
£6.51
£8.05
37mm Overall head size
Part No.
Price
(BK5400)
£7.29
(BK5450)
£7.31
(BK5500)
£7.29
(BK5550)
£7.29
(BK5600)
£7.29
(BK5650)
£7.29
(BK5700)
£7.29
(BK5800)
£7.52
(BK51100)
£7.52
44mm Overall head size
Part No.
Price
(BK6500)
£6.39
(BK6550)
£6.72
(BK6600)
£7.33
(BK6650)
£7.49
(BK6700)
£7.53
-
Price
each
£2.66
£2.66
£2.66
from
29
£0.88
29 • Attachment Spring
To suit both Dzus fasteners (items 26 & 27) and the Lightweight
Aluminium 1/4 Turn Quick Release Fasteners (item 28).
17
18
To calculate the correct pairing of fastener and spring use the following
formula: Add together the thicknesses of both panels to be fastened and the
spring clearance. Subtract spring deflection (0.047” for 37mm overall head
size and 0.062” for 44mm overall head size). Then select the fastener with
the nearest shaft length.
19
• Camloc 1 / 4 Turn
(2600 Series) Fastener
Clearance
1/4 turn to lock, 1/4 turn to release. To determine
the correct stud part number, measure the
total thickness of both panels to be secured
allowing for paint or other protective finishes.
If the total thickness is near the upper limit of
the range then the next longer stud should be
used. Retaining washers which will hold the
stud tight against the outer panel are required
for studs with grip length 3.81mm or longer.
Zinc plated steel.
20
Part
No.
Price
each
Receptacle
(V26S01-2AGV)
(V26S01-3AGV)
(V26S01-4AGV)
(V26S01-5AGV)
(V26S01-6AGV)
(V26S01-7AGV)
(V26S01-9AGV)
(V26S01-10AGV)
£5.90
£5.90
£5.90
£5.90
£5.90
£5.90
£5.90
£5.90
Part
No.
Price
each
(V26S02-2AGV)
(V26S02-3AGV)
(V26S02-4AGV)
(V26S02-5AGV)
(V26S02-6AGV)
(V26S02-7AGV)
(V26S02-9AGV)
£5.90
£5.90
£5.90
£5.90
£5.90
£5.90
£5.90
16 Cross Head
15 Slotted Head
1.52-2.27
2.28-3.03
3.04-3.80
3.81-4.56
4.57-5.32
5.33-6.08
6.85-7.61
7.62-8.37
Panel Thickness
(mm)
1.52-2.27
2.28-3.03
3.04-3.80
3.81-4.56
4.57-5.32
5.33-6.08
6.85-7.61
17 Cast, rivited silicon bronze
receptacle (V212-12-1FGV)
receptacle
(V26R6-1AGV)
440
£2.13
19 Threaded zinc alloy receptacle
(99R10-01A1)
20 Hex nut to suit above
(V15R10-1AC)
21 Retaining washer
(2600-LW-7)
£1.05
£4.42
£0.33
21
• Camloc Push Button (15F Series) Fastener
22 Stud
23 Stainless steel retaining washer
24 Threaded zinc alloy receptacle
25 Hex nut to suit above
£3.16
(15S1-1-1AD)
(15S-11-1CJ)
(V15R13-1-1AB)
(V15R14-1-1AB)
£5.90
£0.28
£3.10
£0.38
30
Aluminium and fibreglass body parts can wear and
crack under the constant abuse of racing. These
reinforcement plates help spread the load and
alleviate this problem.
To suit overall head size:
37mm
(PAN8202)
£1.82
44mm
(PAN8201)
£2.18
18 Lightweight, rivited zinc plated
24
Push-to-open/push-to-close fasteners provide convenience, quick
operation, and very attractive styling for your panels. Suits panel thickness
0.7-2.3mm. Nickel plated steel.
• Push Button (15F Series)
44mm Overall head size
Part No.
Price
(S6-250)
£1.30
(S6-300)
£1.30
(S6-400)
£1.77
30 • Reinforcement Plate
15
16
Camloc 1/4 Turn (2600 Series)
Panel Thickness
(mm)
0.225” (5.715mm)
0.250” (6.35mm)
0.300” (7.62mm)
0.325” (8.255mm)
37mm Overall head size
Part No.
Price
(S5-225)
£0.88
(S5-250)
£0.88
(S5-300)
£1.13
(S5-325)
£0.88
25
22
23
31 • Panel Spring Adjuster
This must have tool pulls the spring evenly so you
don’t get any kinks, or worse still a broken spring
when adjusting the attachment spring. No longer
do you need to push with a screwdriver or pull with
a pair of pliers, this lightweight yet durable tool is
both quick and easy to use.
(PAN7602)
£77.57
• Quick Release
Fastener Tools
32
These tools fit quick release and
Dzus fasteners better than
screwdrivers, reducing the risk of
damage to fasteners and body panels.
Suits items 26-28.
32 Moroso Multi-radius fits all types
of fasteners
(71600) £11.74
33 Dzus Fits all types (19400) £8.22
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
31
33
£8.22
ALL PRICES PLUS VAT
£11.74
