2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 429
Sump / Oil Tank Heaters:
12 Volt Versions
4” x 4” 125W
(3400052)
5” x 5” 250W
(3400053)
24 Volt versions
1.5” x 4” 80W
(3400076)
230-240 Volt Versions
2.75” x 6.75” 250W
(3400090)
6” x 10.75” 1000W
(3400095)
3” Round 125W
(3400091)
1.5” x 6” 125W
(3400092)
3.5” x 4.25” 250W 4.5-12 litre sump
(340093)
5” x 7” 500W 12-25 litre sump
(340094)
Battery Heater
230-240 volt 5.5” x 8.5” 60W
(3400096)
Fuel / oil filter heater
Wrap around Velcro attachment
NEW 12 Volt 6” x 3” 50W
(3400143)
NEW 12 Volt 6” x 4” 100W
(3400144)
24 Volt 9” x 4” 100W
(3400145)
Many more options available online.
1 • Oil Preheaters
Cold starting is where components are most at risk to
wear because the oil is thicker when cold and takes
longer to circulate. These universal preheaters attach to
the sump pan or dry sump tank and gently heat the oil to
near full operating temperature.
• Improves cold cranking, less strain on battery and
starter motor
• Reduces cold start up wear as oils flow quicker
• Provides immediate lubrication
• Reduces emulsification in the oil
• Optimum operating temperature is reached much
faster
Fully universal and easy to fit to the outside of any
sump pan or dry sump tank which has a smooth flat
surface. The low-profile heater pads are designed using
aerospace technology and feature a ‘peel and stick’
high adhesion pad. Typical heat up time, 45-90 mins
depending on ambient temperature:
There are options to suit most applications:
£93.21
£132.86
£105.00
from
£128.57
£208.93
£139.23
£111.43
1
£93.21
£152.00
£236.00
£124.29
£139.28
£158.59
£158.59
3
2
OIL COOLERS AND ACCESSORIES •
PREHEATERS
£2124.24
£1546.58
PREH E ATERS
2 • Engine Preheater Kit
Trying to start an expensive, close tolerance race engine
from cold can be like pressing the self-destruct button.
Used by top race and rally teams who know the
importance of getting engines up to temperature quickly and safely, the APS
electric coolant preheater kit is a must for any application where peak
performance is required from the word go.
The engine preheater can be put into service a few hours before starting the
engine or can work continuously in order to keep the engine permanently at
the required temperature. The kit comes complete with a 230v AC heater with
integrated circulation pump, fixation kit, 3/4” flexible hose (12ft/3.6m long),
male and female 3/4” BSP dry break fittings and weld on aluminium adaptors
for connection to the vehicles cooling system. Comes fitted with a European
2 pin plug.
• Strong die-casted aluminium body
• Compact yet powerful, with integrated circulation pump into
the heating body allowing for fast and homogenous preheating
• Adjustable thermostat 0-80°C
• Flowrate: 1.6 to 2m3/h to 3m height manometer
• Adjustable speed
• A security thermostat with manual reset (rated 25 amp) protects the
system in case of overheating due to a lack of water in the coolant circuit
• 2 Year warranty
(EPH3KWKIT)
£1546.58
from
4
£5.90
3 • G-Heat Team Preheater
This preheater is a professional, simple-to-use solution to cold-starting a
competition engine. Regardless of your engines pedigree, preheating it before racing will increase its efficiency, fuel
consumption and performance. Perhaps more significantly, there will be a noticeable reduction in wear, which ultimately
means that your engine will last longer and potentially lead to increased life between rebuilds. Recognised by leading race
and rally teams as well as engine builders, the industrial heater offers an integral pump, adjustable thermostat (0-80°C),
adjustable speed and internal protective thermostat with manual reset. The G-Link dry breaks offer maintenance-free
connections into the cars coolant circuit while the incredibly flexible 2.5m long convoluted hoses are braided in nonabrasive Kevlar preventing damage to engine components and bodywork. The military specification flight case ensures
the unit is fully protected with enough room for additional international power adaptors and extension leads. The case also
incorporates heavy duty rubber wheels and a telescopic handle for ease of mobility in the paddock. Supplied with dry break
bleed assembly, two aluminium female weld bosses and a moulded European 2pin plug.
(GPH01) £2124.24
4 • Hardware Assortment Packs
These extremely handy packs of workshop essentials offer a cost
effective solution to most hard to find products. All products come in
their own assortment box separating the various sized parts.
Sealing washer assortment (fibre/rubber) 140 piece(SAT116) £8.40
Copper washer assortment 100 piece
(SAT117) £17.07
Spring assortment 200 piece
(SAT127)
£8.40
Flat and spring washer assortment 790 piece
(SAT114)
£8.40
O Ring assortment 225 piece
(SAT124)
£8.40
Screw and washer assortment 347 piece
(SAT112)
£9.13
Rubber cable grommet assortment 110 piece
(SAT123) £11.38
Electrical cable crimp connector assortment
(SAT105) £12.43
Red pre-insulated terminal assortment 165 piece (SAT137) £10.86
Blue pre-insulated terminal assortment 165 piece (SAT135) £14.88
Auto blade fuse assortment 120 piece
(ASB11)
£5.90
Auto mini blade fuse assortment 100 piece
(SAT101)
£8.73
50 Pack from
5
£1.86
5 • Black Self Tapping
Panel Screws
6mm Flange Ø. Pack of 50
1/2” Thread length
(490/50)
3/4” Thread length
(491/50)
8mm Flange Ø. Pack of 50
1/2” Thread length
( 492/50)
3/4” Thread length
(493/50)
10mm Flange Ø. Pack of 50
1/2” Thread length
(494/50)
3/4” Thread length
(495/50)
£1.86
£2.26
£2.76
£2.46
£3.03
£3.47
from
6
7
£42.09
9
6 • Tube Connectors
Tube connectors save space, time and weight whilst
allowing unrestricted flow and provide a secure, fast
and efficient solution to connecting hoses or pipes.
Racetech connectors are made with the latest available
technology and were designed specifically for motorsport use
with strength, weight and pricing as a priority. The connectors
are made from the lightest and strongest 7075 aluminium and
to the highest standard with an easy clasp action for quick
removal. Providing multiple benefits over existing products,
compatible with other manufactures weld on ferrules and
perfect for use on radiators, oil coolers, intercoolers,
throttle bodies and many more applications.
Operating pressure: 140 psi
Burst pressure: 420 psi
Axial Movement: 0.250”
Angular misalignment: +/-4°
ALL PRICES PLUS VAT
8
A (mm)
18.60
18.60
21.00
23.10
23.10
23.10
23.10
24.70
B (mm)
21.55
24.75
29.30
36.30
42.70
49.50
56.15
63.50
C (mm)
19.83
21.23
23.25
26.45
29.43
32.64
35.82
37.35
Weight
(grm)
13.75
14.30
16.90
20.80
20.80
24.30
26.10
37.80
Tube
size
1/2”
5/8”
3/4”
1”
11/4”
11/2”
13/4”
2”
Part No.
(RTTCC-08D)
(RTTCC-10D)
(RTTCC-12D)
(RTTCC-16D)
(RTTCC-20D)
(RTTCC-24D)
(RTTCC-28D)
(RTTCC-32D)
Price
Each
£42.09
£45.04
£47.25
£49.66
£52.61
£54.44
£57.59
£63.44
7 Weld Ferrules
Size
1/2”
5/8”
3/4”
1”
11/4”
11/2”
13/4”
2”
each
£8.45
£9.39
£10.29
£11.27
£13.71
£14.04
£15.24
£17.57
8 Sleeves
9 O Rings
each
£9.32
£9.32
£14.54
£15.04
£17.20
£20.21
£23.36
£25.60
each
£0.30
£0.39
£0.50
£0.65
£1.80
£1.00
£1.10
£1.35
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
429
