2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 359
1
from
£63.22
2
Rebuild kits available. Please call or go online
£59.52
from
3
1 • GS Compact
Integral Reservior
Fully rebuildable with a protective
‘e-coat’ finish. Vertical flange with
2.25” mounting hole centres. 1.25”
stroke, 7/16” inlet, 3/8” outlet.
0.625” bore (260-15096) £63.22
0.700” bore (260-15097) £63.22
0.750” bore (260-15098) £63.22
Fully rebuildable with a protective
‘e-coat’ finish. Vertical flange with
2.25” mounting hole centres. 1.25”
stroke, 7/16” inlet, 3/8” outlet.
0.500” bore (260-15088) £65.47
0.625” bore (260-15089) £59.52
0.700” bore (260-15090) £59.52
0.750” bore (260-15091) £59.52
0.812” bore (260-15092) £59.52
3 • Compact
Integral Reservoir
4 • Compact
Remote Reservoir
Vertical flange with 2.25” mounting
hole centres. 1.4” stroke. 7/16” inlet,
3/8” outlet. Screw on reservoir cap.
0.625” bore (260-2636)
£56.73
0.700” bore (260-6579)
£56.73
0.750” bore (260-1304)
£61.47
£59.50
5 • High Volume
Integral Reservoir
Vertical flange with 2.25” mounting
hole centres. 1.4” stroke. 7/16” inlet,
3/8” outlet.
0.625” bore (260-6087) £55.05
0.700” bore (260-6088) £55.05
0.750” bore (260-6089) £55.05
Vertical flange with 2.25” mounting
hole centres. 1.4” stroke. 7/16” inlet,
3/8” outlet.
0.750” bore (260-6764) £59.50
0.825” bore (260-6765) £59.50
1.000” bore (260-6766) £59.50
Rebuild kits to suit above
0.750” bore (260-6898) £33.75
0.825” bore (260-6899) £33.75
1.000” bore (260-6900) £33.75
£88.87
7
8
10
9
£105.83
11
• Lightweight Billet Aluminium Fluid Reservoirs
Compact design with screw cap and internal rubber bellows seal. Choice of
-3 (3/8” UNF) male outlet for remote mounting or 11/16”-20 male outlet for
direct mounting to some models of Wilwood master cylinders. 2.45” (62mm)
diameter, 4.27” (109mm) high. 4oz fluid capacity.
7 Ribbed body, polished finish
(260-163)
£97.53
8 Ribbed body, grey anodised finish
(260-163) £101.54
9 Smooth body, polished finish. 11/16”-20 outlet only (260-12696) £89.96
10 As item 9 but includes a mounting bracket
(260-12697) £105.83
13 • Bulhead Mounting
Bracket Kit
13
£86.12
11 • Pull Type
Clutch Slave Cylinder
Fully rebuildable, billet aluminium
construction with hard anodised
finish. 7/8” bore x 1.38” stroke.
3/8”x24 inlet fitting.
(260-1333)
£86.12
UNIVERSAL FLOOR & SWING MOUNT PEDAL BOXES
12 • Master Cylinder
Flange Adaptor Kit
from
16
17
£351.32
£239.25
18
£239.25
£182.53
Provides a sturdy master cylinder
mounting solution for Wilwood
swing mount pedal boxes with
forward facing cylinders (such
as item 17). Recessed plate for
additional engine bay clearance.
Suitable for bulkheads with a
material thickness of 1.02-2.03mm.
Supplied with a mounting kit.
(250-13167) £182.53
£64.66
5
ACC ESSO RI ES
6
Allows cylinders with a vertical
flange and 2.25” hole centres to fit
to a horizontal flange with 3.22” hole
centres. Includes 2 different width
clevises, pushrod, dust boot and
mounting hardware.
(250-3677) £48.44
14
£55.05
from
Short body 3.36” (85mm) but with
the stroke of a full-size cylinder.
Fully rebuildable cylinders with a
protective ‘e-coat’ finish. Kit includes
2 reservoir sizes which can either be
mounted remotely using the included
feed hose and adaptor, or directly
to the cylinder. Vertical mounting
flange with 2.25” hole centres. 3.36”
body length, 7.82” total length with
pushrod, 1.12” stroke length, 5/16”
pushrod thread, 1/8” NPT outlet.
0.625” bore (260-10371) £88.87
0.750” bore (260-10372) £88.87
0.812” bore (260-10373) £88.98
0.875” bore (260-10374) £88.87
1.000” bore (260-10375) £88.87
1.012” bore (260-10376) £88.98
£48.44
4
2 • GS Compact
Remote Reservior
6 • Short Compact
Remote Master Cylinder
Kit
12
£56.73
BRAKES AND CLUTCHES •
MASTER CYLINDERS
16 • 3 Pedal 5.25:1 Ratio
Constructed from an aluminium frame with lightweight
fabricated steel pedals and non slip pads for increased
control. Includes balance bar, clevises and mounting
studs.
With throttle linkage
(340-12411) £444.30
Without throttle linkage
(340-12410) £351.32
15
£55.32
19
£93.84
20
• Adjustable 2 Pedal 6.25:1 Ratio
Constructed from an aluminium frame with forged
aluminium pedal arms which are adjustable for fine
tuning of the pedal location and clearance. Includes
balance bar, clevises and mounting studs.
17 Forward facing cylinders (340-11295) £239.25
18 Rear facing cylinders
(340-11299)
£239.25
£239.53
21
£223.53
14 • Balance Bar
Assembly
Designed to maximise travel and
adjustability providing increased
front-to-rear bias control. The
precision spherical bearing with
corrosion resistant finish is durable
and smooth performing. The 3/8”
UNF threaded adjuster bar is high
strength aircraft alloy and fitted
with lightweight, maintenance
free clevises and thrust washers to
eliminate binding under extreme
pivot angles. Includes steel sleeve
for easy weld on operation to
fabricated steel pedal assemblies.
(340-1757) £64.66
15 • Remote Adjuster
Cable
Connects to balance bars with a 3/8”
UNF thread and allows for quick and
easy brake bias adjustments. The
adjuster knob features a special bidirectional detent control providing
the driver with positive adjustment
feedback. 5ft Long cable which can
be cut to length.
(340-4990) £55.32
ALL PRICES PLUS VAT
19 • Single Pedal Single
Cylinder 6:1 Ratio
Aluminium frame and pedal suitable for
clutch use or brakes when used with a
tandem master cylinder. Includes clevis.
(340-13833) £93.84
• Clutch Pedal Kits
Available as either a floor mounted or overhung pedal assembly, these
pedal kits are supplied with 0.750” bore integrated master cylinder and
universal pull type slave cylinder for ease of installation.
20 Floor Mount with 6:1 pedal ratio
(341-15169)
£239.53
21 Overhung with 7:1 pedal ratio
(341-15170)
£223.53
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
359
