2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 352
HEAT MANAGEMENT •
HEAT SHIELD MATERIAL
This heat-shielding material comes in three forms to cater for most applications. Each type
comes in sheet form. Can be easily moulded to suit any shape or recess. Benefits include
thermally efficient, fully recyclable, low weight and ease of forming. These materials can be
re-used time and time again as deterioration is minimal.
Even with its very low weight, it still retains exceptional mechanical strength. Typical
applications include engine bay and general underfloor protection from exhausts etc, spare
wheel wells and much more.
2
3
1
1 • Lite
Single layer double embossed aluminium. Ideal for shielding starter motors
etc. Available in three sizes.
Size: 580mm x 455mm
Weight: 0.33kg
(G1C)
£25.00
Size: 910mm x 580mm
Weight: 0.66kg
(G1B)
£54.00
Size: 1160mm x 910mm
Weight: 1.32kg
(G1A)
£100.00
2 • GII
Double layer aluminium provides a very efficient thermal barrier.
Easily cut and shaped. Available in three sizes.
Size: 600mm x 450mm
Weight: 0.54kg
(G2C)
Size: 900mm x 600mm
Weight: 1.08kg
(G2B)
Size: 1200mm x 900mm
Weight: 2.15kg
(G2A)
Reduces
temperatures
dramatically!
£49.49
£95.00
£165.45
3 • Cirrus GIIIX
Heavy duty double layer aluminium coated steel sheet with synthetic fibre
insert. The ultimate high temperature thermal barrier for use where weight is
not as important as thermal performance.
• Ideal for catalyst heat shields and turbocharger shielding
• Excellent sound deadening
Size: 350mm x 260mm
Weight: 0.20kg
(G3C)
£36.00
Size: 520mm x 350mm
Weight: 0.40kg
(G3B)
£72.00
Size: 520mm x 700mm
Weight: 0.80kg
(G3A)
£140.00
All sizes and weights are approximate
from
1
from
£25.00
from
£49.49
2
3
£36.00
IN-LINE BLOWER FANS AND ACCESSORIES
from
MADE IN THE UK
4
For duct hose
see page
371
£79.20
6 • ‘Y’ Splitter
These moulded Y pieces fit to the Revotec in-line blower
fans and split the air flow allowing it to be directed to
2 different locations via ducting hose. Also suitable for
driver cooling in line blower fan on page 63.
To fit 3” blower fan with
2 x 51mm O/D outlets
(DFY3) £28.60
To fit 4” blower fan with
2 x 63mm O/D outlets
(DFY4) £29.59
from
4 • In-Line Blower Fans
6
£28.60
7
£79.20
De
Designed
for the harsh motorsport environment, these highly
efficient fans are constructed using lightweight anodised
aluminium bodies and feature precision injection moulded,
balanced blades. The motors are fitted with electrical
suppression and voltage stabilised for perfect operation and
longevity.
Ideal for - driver and cockpit cooling, engine bay cooling,
engine bay vapour and dust removal.
Size: 3” (76mm) Inlet/outlet
(DF03)
£79.20
Size: 4” (102mm) Inlet/outlet
(DF04)
£90.20
5
352
£69.99
5 • 2.5” In-Line Duct Fan
Aluminium bodied lightweight fan designed to withstand the
rigors of motorsport use. Ideal for blowing cool ducted air for
driver / cockpit cooling, brake cooling, engine bay cooling or
vapour removal or supplying cool air for engine air intakes. Easy
2 wire electrical 12v connection.
Specifications:
Inlet / Outlet size: 2.5” (63mm) OD, 12 Volt, 1.0 Amp draw.
Weight: 180g
(DF2.5)
£69.99
7 • Time Delay Control
This adjustable timed switch can be user controlled to
maintain power to an electrical circuit for a set time.
Ideal to run fans, electric water pumps or ignition at the
end of a race to aid in cool down. The timer can be set
for up to 7 minutes. Easily mounted to a flat surface or
cable tied to a roll cage.
Up to 20 amp switching capacity.
(TDC01)
£79.20
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
ALL PRICES PLUS VAT
