2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 350
HEAT MANAGEMENT •
1 • Black Under Bonnet
Thermal Acoustic Liner
from
2
£15.36
TM
2 • Vapour Block Fuel
Line Sleeve
Provides an easy and low-cost
solution to prevent rough idling and
difficult starting caused by vapor
lock common with carburettor model
vehicles. Designed to greatly reduce
heat in the line to keep the fuel cooler
and below boiling. Easy to install
with a split design and adhesive flap.
No need to disconnect the fuel line,
simply wrap around line, remove
the adhesive release liner and press
adhesive back flap into place.
• Use on fuel lines to prevent
vapour lock
• For use on any cable, hose or line
for added heat protection
3/8” x 36”
(010671)
£15.36
5/8” x 36”
(010669)
£20.08
1” x 36”
(010672)
£20.66
3
£18.95
TM
Offers a flexible, easy to apply
solution to reflect heat away from
important or sensitive components.
• Withstands 1000°C of radiant heat
• Strong self adhesive backing
• Thin - for a tight wrap
• Flexible and easy to apply
11/2” wide x 15ft long
(010408) £18.95
11/2” wide x 30ft long
(010416) £36.00
2” wide x 60ft long
(010413) £78.95
from
7
from
£349.06
from
9
from
£100.00
4 • Form A Shield
£49.95
12
£25.51
10
TM
Made from 10ml dimpled aluminium with a 1/4” high temperature basalt
insulation and can withstand direct temperatures to +760°C. This is a high
temperature version of Floor and Tunnel Shield II™ (item 7) and can be
applied directly to hot surfaces such as exhaust manifolds, pipes and
silencers and can be easily trimmed to size. This has an outstanding
performance in reflecting and blocking heat. None adhesive.
21” x 4ft
(010517)
£100.00
42” x 4ft
(010516)
£190.60
TM
5 • Titanium Protect-A-Boot
2 Cylinder Kits
6” Titanium
(010541) £23.95
8” Titanium
(010543) £27.95
8 Cylinder Kits
6” Titanium
(010542) £98.50
8” Titanium
(010544) £103.95
3 • Cool Tape
8
from
4
Engineered to handle extreme heat providing the ultimate protection for
today’s high voltage ignition systems. Available in 6” x 3/4” ID with built in
metal ring or an 8” x 1” version without ring that is perfect for GM LS engines.
• Ultimate heat protection for spark
plug boots
• Withstands heat up to 983°C
• Universal fit for most straight or angled boots
from
from
5
£23.95
TM
6 • Protect-A-Boot
Protection for spark plug boots from temperatures
generated by vehicle exhaust headers or
manifolds. Withstands 650ºC direct heat.
2 Cylinder Kits
6” Silver
(010501)
£20.71
6” Black
(010511)
£18.95
8 Cylinder Kits
6” Silver
(010502)
£78.99
6” Black
(010512)
£78.99
Other colours available.
TM
10 • Easy Loom Split
Wire Sleeve
from
£18.95
TM
Designed to withstand direct temperatures of up to 950°C, and insulate against
unwanted road noise, this product is ideal for under vehicle applications.
• Minimal clearance needed - only 3/16” thick
• Self adhesive backing for easy application
• Excellent heat and sound barrier
21” x 2ft (3.5 sq.ft)
(050501)
£49.95
21” x 4ft (7 sq.ft)
(050502)
£94.95
42” x 4ft (14 sq.ft)
(050503)
£186.95
£267.20
Multi-layer construction for extreme heat protection. Made from pulverised
volcanic rock integrated into a wrap type material. Can withstand extremely
high temperatures up to 982°C. Custom made for the Garrett range of turbos
so fits snugly. Buy shield only or a kit (locking ties/titanium exhaust wrap)
T25/T28
Shield only (010148) £292.31 Kit (010149)
£313.36
Garrett T3
Shield only (010140) £267.20 Kit (010141)
£291.85
Garrett T4
Shield only (010144) £316.30 Kit (010145)
£341.47
Garrett T6
Shield only (010146) £579.59 Kit (010147)
£604.78
Garrett T22
Shield only (010165) £265.78 Kit (010166)
£289.43
from
13
£20.96
13 • Boom Mat Tape
This spray is a simple and
effective solution for
annoying squeaks, rattles
or unwanted engine and
road noise. Ideal for hardto-reach places (inside
door panels, rear quarters
etc) the spray on dries to
touch in approx
20 minutes.
(050220) £15.91
2.5mm thick butyl rubber with
aluminium facing 2” x 20ft roll.
Black
(050215)
£27.50
Silver
(50449)
£20.96
14
£29.19
from
15
£158.74
14 • Black
Seaming Tape
8 • Gen 3 Onyx Turbo Heat Shield
DEI’s most effective turbo shield. 4-layers handle up to 1371°C radiant and
982°C direct. Inner layer is a s/steel fabric for the highest temps. The 2nd is a
glass fibre, s/steel and silicone for strength and insulation. The 3rd is a thick
silica stops thermal conductivity. The 4th adds strength.
Buy shield only or a kit (2” x 15’ titanium wrap, 2 x 20” locking ties, 5’ of
fastening wire)
GT2252
Shield only (10272) £349.06
Kit (10266)
£365.02
Garrett T25/T28
Kit (10265)
£390.70
Garrett T3
Shield only (10267) £350.26
Kit (10261)
£372.55
Garrett T4
Shield only (10269) £410.75
Kit (10263)
£434.21
Garrett T6
Shield only (10268) £643.32
Kit (10262)
£680.15
Garrett T6X
Shield only (10270) £717.20
Kit (10264)
£732.76
Eliminates unwanted engine and road
noise. A rubber-based polymer with an
aluminium foil laminate and adhesive
backing, it is unaffected by extreme
temperatures, corrosion resistant and
can be applied to metals, paint, plastic
and fibreglass.
12” x 121/2” (pack of 2)
(050200)
£20.95
12” x 121/2” (pack of 4)
(050202)
£34.50
12” x 121/2” (pack of 8)
(050204)
£59.95
£15.91
11 • Boom
Mat Spray
6
TM
12 • Boom Mat
Designed to offer protection to exposed
wiring in looms fitted to all manner
of vehicles, this split sleeving, unlike
conventional sleeving, does not require
the wires to be disconnected to be fitted.
The sleeving itself possesses a certain
amount of elasticity, particularly useful
at the split where, once the wiring is in
place, the sleeve simply returns to its
usual position and closes the opening
to provide complete protection for
the wiring contained inside. Protects
wiring from abrasion, chemicals and the
natural elements.
3/16” (5mm) x 20ft (010650) £25.51
5/16” (8mm) x 20ft (010651) £26.76
3/8” (10mm) x 20ft (010652) £31.00
1/2” (13mm) x 12ft (010653) £26.43
5/8” (16mm) x 12ft (010654) £25.67
3/4” (19mm) x 10ft (010655) £34.41
1” (25mm) x 10ft
(010656) £37.35
11
7 • Floor And Tunnel Shield II
9 • Titanium Turbo Shield
350
£121.54
1
DEI Under Hood™ Thermal Acoustic Lining was designed
primarily for the engine compartment to greatly reduce heat
and noise with an easy peel and stick product anyone can
install. Engine heat and noise often is a problem with modified
vehicles packed with high performance components. The use
of Under Hood™ Thermal Acoustic Lining can help solve this
issue. The bonnet will be much cooler preventing paint heat
damage. The noise reduction will also mean less noise inside
the car. Black carbon fibre look, colour means look more
factory than silver or gold. 1/2” thick
Measures 32” x 59” (13.1 sq. ft)
(050129)
£121.54
Ideal for using with Black Floor and
Tunnel for edge and seam sealing.
Made with a glass fibre scrim, high
temperature adhesive and a durable
black finish. Adds the finishing
touch.
1.5” x 15ft roll (10039)
£29.19
15 • Ultra 47 Turbo Heat Shield
The Ultra 47 is developed specifically for Garret T3 and T4 turbo but will fit
other models of turbocharger (see below). The shields are made using a
Tri-layer mix of an aluminium impregnated glass fibre outer shell with a high
temperature insulating mat core with silica glass blend liner.
Supplied as a shield only or as a kit (2” x 15ft roll of black exhaust wrap x 1 20”
stainless locking ties x 2 5ft length of fastening wire x 1)
Available in two versions
Garrett T3 /Borg Warner S300 (housing smaller than 14cm/sq) / Garrett GT35
T3 housing & Precision / Tial / Turbonetics with V-3 band
Shield only (010172) £158.74
Kit (010174)
£171.78
Garret T4 / Borg Warner S300 (housing larger then 16cm/sq) / S400 / Garret
GT35R T4 housing / GT37R / GT42 / GT45
Shield only (010173) £189.90
Kit (010175)
£202.87
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
ALL PRICES PLUS VAT
