2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 291
from
1
Typical features of
AEM Electronics
X Series
gauges:
£180.03
2
3
£167.97
£152.17
4
£323.17
• Easy to read display
1 • Wideband UEGO
Air/Fuel Sensor
Controller Gauge
• User configurable
display and settable
thresholds to trigger
warning lights
X-digital technology makes it the
fastest responding wideband air/
fuel ratio controller. The gauge has
a configurable display via buttons
on the face of the gauge, these
allow you to change the air/fuel
ratio values for different fuels,
lambda or 2% (30-0300) £180.03
OBDII version (30-0334) £231.35
• Auto dimming display
automatically adjust for
optimum brightness
• Peak reading recall
function to view peak
reading retrospectively
2 • GPS Speedometer
This GPS speedometer has a range
of 0-160mph. If a kph readout is
required, an accessory kit is
available which includes a 0-260kph
dial face. Displays speed, heading
and altitude. GPS based speed is
highly accurate and is not affected
by changes in tyre sizes.
(30-0313) £167.97
KPH Accessory kit
(30-0313-ACC) £10.29
3 • OBDII Datastream
Gauge
This gauge takes OBD data from
2008 on vehicles and displays them
on the easy to read digital readout.
Depending on the vehicle, the
typical parameters which could be
displayed include: IAT, EGT, RPM,
Speed, MAF, Fuel pressure, Boost
pressure, Throttle position,
Lambda, Manifold pressure, and
reads fault codes and allows you to
clear them, plus more.
(30-0311) £152.17
4 • Tru-BoostX Boost
Controller Gauge
Combining an electronic boost
gauge with the ability to control
boost using buttons on the front of
the gauge with no additional boost
controller interface required.
A choice of psi, bar, or kPa and a
LED dial around the edge and a LED
digital display in the centre. It has
has a built in 80psi/5.52 Bar sensor.
(30-0352) £323.17
GAU G ES
• 52mm dia / 21mm depth
INSTRUMENTS •
X SERIES GAUGES
AEM X Series gauges are AEMnet / CANbus party loggers / EMS which accept AEMnet. The gauges also have 0-5v
analogue outputs for inputting to ECU’s and data loggers.
The centre of the display shows values as digital numbers, and the outer display features a sweeping LED for a quick visual reference at a glance.
from
5
£184.51
6
5 • Boost Pressure
Gauge
Comes with a black reversible boost
face for either psi or bar readouts.
-30inHg to 35psi / -1 to 2.5bar
(30-0306) £184.51
-30inHg to 60psi / -1 to 4bar
(30-0308) £293.26
6 • Turbo Boost / Fuel
Pressure Gauge
Out of the box this gauge comes
with a black reversible boost
(0-15psi) / fuel pressure (0-15psi)
face.
(30-0309) £242.22
10 • CD Carbon Dash Display / Data
Loggers
7
£242.22
£184.51
7 • Oil / Fuel Pressure
Gauge
Comes with a black reversible oil
pressure face with 0-100psi or 0-7
bar displays. An accessory kit is
available separately which includes
fuel pressure displays in bar and
psi.
(30-0301) £184.51
8
£194.43
8 • Oil / Water
Temperature Gauge
Out of the box this gauge comes
with a black reversible water
temperature face with 40-150°C or
100-300°F displays.
(30-0302) £194.43
from
Flat Display
10
9
£168.90
9 • Voltmeter
This voltmeter has a range of 8 to 18
volts making it suitable for all
12 volt vehicles.
(30-0303) £168.90
Standard Display
£941.08
The CD carbon digital dash displays are ultra lightweight and
provide a compact solution to replace all dashboard gauges
making them ideal for Motorsport use or for kit cars, custom
cars and resto-mods. The full colour screen displays the
fully user customisable layout allowing you to view only the
parameters you require. CAN Bus inputs and single power/
ground cables provide simple plug in connectivity with the
ability to view data from over 250 CAN devices. Available as
standard or flat display with 5” or 7” display, with and without
GPS and options for data logging.
Full range of accessories available, visit our website for
details.
5” Display
(30-56)
from £941.08
7” Display
(30-57)
from £1334.82
from
11
£162.37
11 • CAN Sensor Adaptors
The CAN sensor adaptors convert analogue,
digital and frequency inputs into a CAN Bus
signal compatible with the AEM range of digital
dash displays. This allows the dashes to operate
on vehicles without CAN or ECU’s.
6 Channel CAN Sensor Module
£162.37
(30-2226)
22 Channel CAN Sensor Module
(30-2212)
£354.49
ALL PRICES PLUS VAT
12
£654.87
12 • EV 8 Channel PDU-8
The PDU-8 provides a cost effective solution
for controlling switched devices on electric
vehicles via CAN connection to a VCU200 or
VCU300. The PDU-8 power distribution unit has
8 channels but if more channels are required
you can link up to 8 units together for a total
of 64 available channels. Ideal for controlling
devices such as cooling pumps, fans, lights,
indicators, windscreen wipers etc.
(30-8300) £654.87
13
£597.93
13 • 8 Button CAN Keypad
This 8 button keypad provides manual control
functions via CAN for electric vehicles when
used with the PDU-8 power distribution
module. It is ideal for switching functions such
as ignition, park, reverse, neutral and drive as
well as 2 x map switching functions
like motor power or traction control.
(30-8400) £597.93
14
£4707.87
14 • EV Vehicle Control Units
This programmable VCU (Vehicle Control Unit)
provides customisable torque management
for single motor electric vehicles making it
the perfect tuning tool for Motorsport or high
performance road use. As well as motor control
the VCU can communicate with four
independent CAN Bus networks and is
compatible with direct and in-direct drive
EV set ups. VCU-300 - Multi motor control
(30-8100) £4707.87
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
291
