2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 261
1
£363.56
2
£519.43
DESIGNED & MANUFACTURED IN THE UK
£97.08
3
4
Designed for use in the majority of historic
and retrospective rallies. The period
tripmeter is accurate to one hundredth of
a unit (miles or kilometres) and with their
electro-mechanical clicking digits can be
seen as ‘fiddle proof’ hence their widespread
approval.
Features:
• Dual display - Total distance Intermediate distance
• Calibrated via (protected) push-wheel
switches on the underside of the Meter.
• 999.99 Maximum total distance
• 999.99 Maximum intermediate distance
• Can be calibrated to read in miles or
kilometres.
• Last 2 digits are red on white background
for clarity of the tenths and
hundredths of a mile/kilometre.
• Independently zeroed displays
• Display lenses for increased digit size
• Suitable for both positive and negative
earthed vehicles.
• 12v illumination from bright LED lighting
under the hood
• Driver display unit connectivity as standard
Dimensions: 117 x 67 x 73mm
142 x 70 x 85mm inc mounts and hood
Weight: 560g (inc cables) (BR9C) £363.56
A step up from the Retrotrip 2, the Retrotrip 3
contains two completely separate electromechanical tripmeters in the one case, both fed
by the same sensor.
Features:
• Triple display - Total distance - Intermediate
distance - Separate tripmeter enabling
stopwatch read out/average speed
calculations
• Each tripmeter is calibrated easily via
independent push-wheel switches on the
front face.
• Separate on/off switches for each tripmeter,
as well as a main on/off switch on the front face
• 999.99 Maximum total distance
• 999.99 Maximum intermediate distance
• Can be calibrated to read in miles or kilometres
• Independently zeroed displays
• Display lenses for increased digit size
• Suitable for both positive and negative
earthed vehicles.
• 12v illumination from bright LED lighting
under the hood
• Driver display unit connectivity as standard
Dimensions: 140 x 100 x 75mm
170 x 110 x 95mm inc mounts and hood
Weight: 952g (inc cables)
(BR10C) £519.43
3 • Retrotrip Back-Tracker
Retrotrips themselves do not have the facility
to count backwards, which is one of the many
features that make it so popular in the historic
events. This feature however does not help
if you make a mistake. This is where the
Retrotrip Back-Tracker comes in, this gadget
when activated, stores the miles/kilometres
you drive to correct your error, then when
you are back on the right road, a simple flick
of a switch the Back-Tracker counts out your
incorrect miles/kilometres, not allowing
your Retrotrip to count up until is has erased
all those incorrect miles or kilometres you
gathered.
Features:
• Store function
• Discharge function
• Clear all button - in the event of
coming across a timing point
Dimensions: 75 x 50 x 25mm
Weight: 140g (inc cable)
Standard Version - Connects directly to the 3
core grey sensor cable of the Retrotrips
(BR59) £97.08
Plug Kit Version - Connects directly to the 4
pin plug and socket of the plug kit
(BR59PK)
£97.08
4 • Retrotrip Driver
Display Unit
For either the Retrotrip 2 or 3, this unit sits
in front of the driver replicating the distance
count.
Features:
• Single Display - Total Distance
• Independently Zeroed Display
• LED under-hood illumination - switch
operated
• Electromechanical Counter
Available in 2 styles:
Classique
(BR91C)
Mulsanne
(BR91M)
Dimensions: 100 x 40 x 90mm
Weight: 244g (inc cable)
£99.80
R A L LY CO M PUTE RS
2 • Retrotrip 3 Classique
1 • Retrotrip 2 Classique
£99.80
NAVIGATION •
HISTORIC TRIPMETER - RETROTRIP RANGE
• Retrotrip RAM Window
Mount
Specially designed Retrotrip RAM Mount with
a heavy duty vibration dampening suction cup
and movable arm. Also available as just the
RAM Mount for fitting with any RAM Mount
accessory (not shown)
Retrotrip Window Mount
(BR9RAM-W) £85.00
Retrotrip RAM Mount
(BR9RAM) £36.75
The Retrotrip Range of tripmeters will work with all the Brantz Sensors available.
SENSORS, PROBES AND ACCESSORIES BRANTZ SENSORS ARE REQUIRED FOR ALL TRIPMETERS
5
6
8
9
The types are:
5 Universal Speedo-Cable Sensor for mechanically driven speedometers.
• Accessories
(BR1)
Fuse Kit
(BRFUSE)
£5.52
Dual Sensor Switch
(BR49) £44.97
International Sun Screen/Night
Filter
(BRSS7) £17.18
Power Conditioner – essential for
6V vehicles
(BR21) £58.50
International Window Mount
(BRINT-RAM-W) £85.00
10
7
£57.75
6 Universal Wheel Sensor - 1mm this sensor will detect any passing metal
object such as a brake disc bolt
(BR2B)
£29.90
High temperature version of above
(BR2A-HT)
£52.63
Wheel Sensor - 4mm sensing distance version of above
(BR2A-4MM)
£41.32
7 Canbus Interface connects directly into the canbus system of post 2005 cars
to give speed/distance info to any Brantz tripmeter
(BR56) £165.83
Available with a Contactless Reader for non-intrusive wire connections
(BRCCR)
£85.35
Also available as a Plug In version direct into your cars OBDII socket
- call for details.
M22 Japanese Gearbox Sensor fits between gearbox and speedo-cable
(BR3)
£56.28
8 M18 Ford/EU Gearbox sensor
(BR4)
£56.28
Sensor Pulse Doubler For increased calibration accuracy (BR52)
£59.63
M12 Smiths/Jaeger Sensor fits between the speedometer
and the speedo cable
(BRM12)
£68.94
9 Electronic Speedo Interface for vehicles with an electronic speed pulse from
either factory fitted speed sensor or ABS (if braking system is deactivated)
(BR5)
£60.79
11
12
£14.06
12 • Multi-Function Clock / Stopwatch
• Aux Socket To 1/4” Jack Adaptors
A compact battery operated clock which is simple to use and can be
used as a classic digital clock or as a stopwatch making it ideal for
rally car use.
Large easy to read display shows hours, minutes, and seconds.
Features a settable alarm.
Supplied with a holder for attaching to a dashboard or door.
Dimensions: 72 x 42 x 27mm
(MFCLOCK) £14.06
10 Aux plug to 1/4” jack socket
(BRC-1/4-JACK-AUX)
£8.71
11 Aux socket to 1/4” jack plug
(BRC-AUX-1/4-JACK)
ALL PRICES PLUS VAT
£6.65
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
261
