2025 Demon Tweeks Motorsport E-Catalogue - Catalog - Page 205
•
SEATS •
BENEFITS OF FITTING AN INDI SEAT
Advanced Energy Absorption • Enhances Driver Performance • Reduces Driver Fatigue •
SO, WHAT IS AN INDI SEAT?
The iNDi Seat kit has been used in all levels of motorsport, from entry level to the very highest professional level today which include these championships amongst many others:- F1, F2, F3, F4, Formula
Ford, LMP1/2/3, BTCC, GB3, GB4, Radical, Caterham, NASCAR & INDY Car.
Using their own unique resin and polyprop bead mix that is quick curing (from mixing to cured in 30
mins), the iNDi Seat can be made at any temperature range, making it the perfect solution whether
you’re at the workshop or trackside.
The iNDi Seat kit uses a vacuum casting bag with a unique bead and quick cure resin mix, making it
a simple and professional seat system to fit any driver into any race car. The iNDi Seat kit provides a
driver with an ‘indi’-vidual seating solution for the optimum racing position, support and safety. The
materials used in the iNDi Seat kit have been extensively tested at an FIA laboratory to ensure they
meet the correct requirements for motorsport use.
from
£130.88
B ES PO KE RESIN SE ATS
Your racing seat position is one
of the most under estimated
performance and safety items
within your vehicle.
iNDi Seat, using over 26 years
of experience and technical
know how offers you a bespoke
product that delivers you the
driver the optimum position,
comfort, safety and performance.
So, what is an iNDi Seat?
• The cure resin is not temperature sensitive and because its quick curing it can be made at any
temperature – even trackside before test sessions and race weekends
• Cured and ready for cutting/ trimming within 35 minutes of mixing in the resin and water. NO other
seat insert system on the market can match this quick and convenient quick curing time
Each Kit Contains the following:
• Casting bag with filter and on/off valve
• Impact absorption beads (quantity depends on iNDi Seat kit size)
• Quick Cure Resin (correct amount for size of kit chosen, resin has a blue dye to assist in the mixing)
• Measuring cup (if you need to measure the resin/ or use to pour the resin in to the bag)
• Leaflet including unique QR Code to take you to the iNDi seat kit website where you’ll find our iNDi
Seat Kit instruction manual (no paper guide due to environmental pledge from iNDi Seat)
FITTING INSTRUCTIONS
STEP 1
• Preparation
Cover anything sharp in the cockpit. Driver needs to wear their full race kit for the seat fitting.
STEP 2
• Practice Dry Fitting - No Resin
1 • Kit Sizes And Suitable Applications
25 Litre (bag size 1100 x 750mm)
Designed to fit torso or legs, in a small cockpit or seat shell.
(INDI-0025)
£130.88
30 Litre (bag size 1100 x 1500mm)
Designed to fit and ideal for tight cockpits, or as a liner/ insert inside a seat
shell or extractable seat eg: F1, F2, F3, F4, GT3, GT4, LMP1/2/3
(INDI-0030)
£164.28
This is a bead volume check, it is a trial fitting with no resin at this stage. Pull a slight vacuum on the iNDi Seat,
and place the iNDi Seat into cockpit. By adjusting the vacuum and positioning beads, mould the driver. If too many
beads, empty accordingly and when the driver is happy with position, apply full vacuum. Exit driver.
Mark and measure key areas of thickness on the bag (back/ base/ legs etc)
40 Litre (bag size 1100 x 1500mm)
Designed to fit F1000, Radicals plus as above 30 Litre – but for smaller
drivers
(INDI-0040)
£173.05
STEP 3
• Mixing Resin and Water
50 Litre (bag size 1100 x 1500mm)
Designed to fit – Caterhams, Historics – and this is one of the most popular
single seater kits, used in F1, F2, F3, F4, GT3, GT4 – or as a base seat in
LMP1/2/3
(INDI-0050)
£203.50
STEP 4
• Fitting with Resin Mixed
70 Litre (bag size 1100 x 1500mm)
Designed to fit for a stand alone seat in Caterham, Sports 2000, and for very
small drivers in Formula cars (when attempting to make a stand alone seat,
a structure is always required for the seat to be held in)
(INDI-0070)
£239.65
Remove valve, mix resin in first (refer to volume chart in our instructions). Once beads are mixed with resin,
next mix in the water (refer to volume chart). You now have 25 minutes until the seat is fully cured.
Spread mix back to where it was using your pen marks and measurements.
Fit iNDi Seat back into car. Repeat fitting as per Step 2.
STEP 5
• Final fitting
When driver is happy with the position, maintain full vacuum until cured.
Driver needs to keep still and not move in the iNDi seat until the iNDi seat is fully cured.
Cover
2
STEP 6
• Cutting and Trimming iNDi Seat
£52.17
Exit driver and remove cured iNDi Seat from the car. Cut away all excess material and the seat belt holes required.
STEP 7
• Final Finishing
Smooth any bumps with a rasp/sand paper. Re-fit iNDi Seat back into car.
Check with driver all the trimming and cutting is ok.
2 • iNDi Cover
Flame resistant material specifically designed and used for the covering of
all iNDi seats. Featuring a honeycomb structure which reduces moisture
being trapped within the material twinned with a 3mm foam backing for extra
comfort and durability. iNDi seat recommend 1m x 1.5m to cover all iNDi seats
mentioned above. iNDi Cover is sold in 1 metre lengths and comes 1.5 meters in
width
(INDICVR15)
£52.17
ALL PRICES PLUS VAT
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
205
