DAMPA DCC 200 300 e-katalog - Flipbook - Side 5
Ceiling Panels
DCC 300
275 mm
25
25
DCC 200
26
25
175 mm
25
DCC 200/300
Type 308
Type 315
DAMPA DCC 200/300 System is a Fire Rated,
Suspended Marine Ceiling System consisting
of linear ceiling panels in two modular widths,
300 mm, also available in width 200 mm upon
request.
Plain surface.
Inlay of 25 mm mineral wool.
Perforated with 1.8 mm holes at 3.5 mm
centres (20.5%), and with black acoustic felt.
Inlay of 25 mm mineral wool.
®
The same carrier type is used for both widths.
Fast and efficient installation is assured, as ceiling panels are supplied ‘pre-cut’ in accordance
with customer drawings and specifications.
Weight: 6.7 kg/sq.m.
Fire classification: B-0, A-15.
With additional insulation overlay
Weight: Approx. 8.9/8.4 kg/sq.m.
Fire classification: B-15, A-30
Weight: 5.8 kg/sq.m.
Fire classification: B-0, A-15.
With additional insulation overlay
Weight: Approx. 8.0/7.8 kg/sq.m.
Fire classification: B-15
By use of only a few basic components a functional and aesthetic ceiling can be designed to
suit all types of areas.
Fast and reliable delivery is a trademark of
DAMPA’s modern and flexible production
facilities.
DAMPA® DCC 200/300 are made from stoveenamelled 0.6 mm galvanised steel respectively.
The panels can be supplied perforated or plain,
and in any specified length, from 600 mm to
5000 mm as standard.
Lengths less than 600 mm, and up to 6000 mm
can be made to order.
Type 310
Type 313
Plain with air injection slots.
As type 308, plus 2 rows of 3 x 7 mm air
injection slots at 15 mm centres (air inlet area
equal to 0.0028 sq.m./lin.m ceiling panel).
Perforated with air injection slots.
As type 315. Air injection slots as type 310.
All panels are 26 mm deep and are supplied
with end closings and 25 mm mineral wool inlay
as standard.
Inlay of 25 mm mineral wool in PE-sleeves
Weight: 6.7 kg/sq.m.
Fire classification: C.
Inlay of 25 mm mineral wool in PE-sleeves
Weight: 5.7 kg/sq.m.
Fire classification: C.
Note: The suspension system, based on average
consumption rate, weighs 1.5 kg/sq.m.
Installation of Ceiling Panels
The DAMPA® DCC 300/200 Ceiling Panels are
normally installed progressively, starting at
either end of the room. However, panels can be
left out at any position to be installed later.
After aligning the leading and returned flanges
with the clips of the modular carriers, the panels
are engaged starting at one end.
Securing the Panels
Fire rated ceiling panels are installed with a
self-tapping screw at each end.
Long panels require an additional screw at
every second modular carrier intersection
(intervals of approx. 2400 mm).
5
