DAMPA Clip In Tile e-katalog - Catalog - Page 5
DAMPA® Rainfall Ventilation
DAMPA® Rainfall ventilation is a diffuse
ventilation system. By creating a higher
pressure above the ceiling surface a diffuse
ventilation air flow is obtained. Benefits of a
diffuse ventilation system are: Better indoor
climate, less draught and energy savings.
DAMPA® Clip-In tiles can be installed with a
gap of variable size crosswise to the carrier
for air injection in areas where the ceiling void
is used as air supply chamber.
By use of Carrier No. 10 tiles can be installed
with an open groove of variable size surrounding each individual tile.
C
D
By using DAMPA Spacer Clip No. 1 a groove of
2-15 mm is achieved.
Other spacings can be made upon request.
A
All carrier and hanger centres
are maximum distances
B
A
Wall first Carrier No. 14
600 mm
B
Carrier No.14 to next Carrier No.14
1200 mm
C
Wall to first hanger
600 mm
D
Hanger to hanger
1200 mm
DAMPA® Clip-In, Modules
STANDARD MODULES - SHARP EDGE
Aluminium
Steel
300 x 300 x 0.7 mm
2.4 kg/square meter
300 x 300 x 0.5 mm
5.1 kg/square meter
300 x 600 x 0.7 mm
2.3 kg/square meter
300 x 600 x 0.5 mm
4.7 kg/square meter
600 x 600 x 0.7 mm
2.2 kg/square meter
600 x 600 x 0.5 mm
4.5 kg/square meter
600 x 1200 x 0.7 mm
2.2 kg/square meter
Type AL-15 (Perforated)
Type AL-0 (Unperforated)
STANDARD MODULES - BEVELLED EDGE
Perforated tiles are as standard provided with
black acoustic felt bonded to the reverse side,
other colours on request.
Steel
300 x 300 x 0.7 mm
2.4 kg/square meter
300 x 600 x 0.5 mm
4.7 kg/square meter
300 x 600 x 0.7 mm
2.3 kg/square meter
600 x 600 x 0.5 mm
4.5 kg/square meter
600 x 600 x 0.7 mm
2.2 kg/square meter
Type AL-15 (Perforated)
Type AL-0 (Unperforated)
The standard type AL-15/ST-15 tiles are perforated with 1.8 mm holes at 3.5 mm centres,
open area 20.5% and, depending on modular
size, with 5-10 mm unperforated border on all
four sides.
DAMPA also offers a wide range of standard
perforation types in various patterns.
Type ST-15 (Perforated)
Type ST-0 (Unperforated)
Aluminium
DAMPA Clip-In tiles are available in aluminium
and steel in sizes up to 600 mm x 2400 mm.
Type ST-15 (Perforated)
Type ST-0 (Unperforated)
5
