DAMPA 100 200 300 - e-katalog - Catalog - Page 6
DAMPA® 100/200/300
Installation principles
DAMPA® 100/200/300 ceiling units
can all be installed in any
combination on the same
Modular Carrier No. 40
A
C
B
D
42
Carrier and Hanger Distances
All carrier and hanger centres are maximum distances.
A:
Wall to first hanger
600 mm
B:
Hanger to hanger
1200 mm
C:
Wall to first Modular Carrier No. 40 in connection with:
Edge Trim No. 13
300 mm
Edge Trim Type 1
300 mm
Angle Runner No. 1.
1200 mm
D:
Modular Carrier No. 40 to next Carrier No. 40
1200 mm
If luminaires, air diffusers or integrated fittings are incorporated
into the ceiling, it may be necessary to provide additional hangers
to accommodate the extra weight.
Installation Principles
Installation of Ceiling Units
Perimeter Details
DAMPA® 100/200/300 ceiling units can all
be installed in any combination on the same
Modular Carrier No. 40 with a minimum of
suspension points due to the well-proven rigid
and easily adjustable suspension principle.
DAMPA® 100/200/300 ceiling units are normally
installed progressively, starting at either end of
the room.
Where ceiling lengths can be predetermined,
use Angle Runner No. 1 transversely to ceiling
units with a shadow frieze to accommodate
building tolerances.
After fixing of the perimeter trims, the modular
carriers are suspended.
When using either Edge Trim No. 13 or
Angle Runner No. 1 and No. 2, a slot is cut at
the ends of Modular Carrier No. 40 to splice
into the horizontal flange of the edge trim or
of the angle runner.
6
Ceiling units can, however, be left out to be
installed later.
Built-In Heights
The minimum constructional height of a
DAMPA® 100/200/300 Ceiling System, which
is installed directly to possible existing gridwork,
is 21 mm by use of Modular Carrier No. 44 and
41 mm by use of Modular Carrier No. 40.
Where ceiling units have to be cut, use
Edge Trim Type 2 parallel to ceiling units and
Type 1 transversely.
Both types can be secured directly to the wall
or if a shadow frieze is required, on to the
Edge Trim No. 13 or Angle Runner No. 2.
See more specifications here
