md-19004-en - Flipbook - Side 2
1. General Information
TAIM e.V. - Verband Industrieller
Metalldeckenhersteller (Association of
Industrial Metal Ceiling Manufacturers)
Metal ceiling systems made of steel as
heating and cooling ceilings
Programme holder
IBU - Institut Bauen und Umwelt e.V.
Panoramastr. 1
10178 Berlin
Germany
Owner of the declaration
TAIM e.V.
Osloer Str. 100
13359 Berlin
Declaration number
EPD-TAI-20180163-IBG2-EN
Declared product / declared unit
The declared unit is 1 kg metal ceiling systems made
of steel as heating and cooling ceilings. The area
density kg/m² is calculated product-specifically.
This declaration is based on the product
category rules:
Metal ceilings, 07.2014
(PCR checked and approved by the SVR)
Scope:
Issue date
30-01-2019
Valid to
29-01-2024
This declaration applies to all production
manufacturers of the following TAIM e.V. members.
The data of this Life Cycle Assessment is based on
annual data from 2017, which were collected at the
factory.
DAMPA ApS: www.dampa.com
durlum Group GmbH: www.durlum.com
FURAL Systeme in Metall GmbH:
www.fural.com
Geipel® GENEX- Vertrieb Ltd. & Co. KG:
www.geipel-genex.de
Linder AG: www.Lindner-Group.com
After the publication this document was subsequently
adjusted in chapter 2.5 on May 27, 2020.
The owner of the declaration shall be liable for the
underlying information and evidence; the IBU shall not
be liable with respect to manufacturer information, life
cycle assessment data and evidences.
Verification
Prof. Dr.-Ing. Horst J. Bossenmayer
(President of Institut Bauen und Umwelt e.V.)
Dipl. Ing. Hans Peters
(Head of Board IBU)
The standard /EN 15804/ serves as the core PCR
Independent verification of the declaration and data
according to /ISO 14025:2010/
internally
x externally
Matthias Schulz
(Independent verifier appointed by SVR)
2. Product
2.1
Product description / Product definition
Heating and cooling ceiling systems are manufactured
from folded, rollformed and partially stamped steel as
complete kits or as individual components. The
construction set comprises a top layer, e.g. linear
panel or strip panel ceilings, as well as the
substructure for fastening the metal ceiling. The
substructure is predominantly made of steel. It can be
attached directly to the raw ceiling, can have various
suspension heights and depends in its design on the
shape, functional requirements and the weight of the
linear panel.
2
For the placing on the market of the product in the
EU/EFTA (with the exception of Switzerland),
Regulation (EU) No. /305/2011/ (CPR) applies. The
products require a declaration of performance taking
into consideration the harmonized /EN
13964/, Suspended ceilings - Requirements and test
methodsand, the CE-marking.
For the use and application of the product, the
respective national provisions apply. Metal ceilings
according to the technical regulations of the TAIM e.V.
/THM/ are fastened by hangers directly to the load-
Environmental Product Declaration TAIM e.V. - Verband Industrieller Metalldeckenhersteller – Metal ceiling systems
made of steel as heating and cooling ceilings
