EN Cleco Catalog - SP-1081 Online - Catalog - Page 271
Specialty Tools
Saw Blades - 7/16” arbor hole
Used on Cleco Dotco Saws
•
Used on Cleco Dotco Saws
Maximum Depth of Cut
Description
14-1888
2“ OD 44T for Aluminum, Laminated Plastics, Pressed Board, Wood.
7/16“ X 1/16“
14-1889
2“ OD 60T for Aluminum, Laminated Plastics, Pressed Board, Wood
7/16“ X 1/16“
12S1288-04
2
14-2147
2 1/2“OD 44T for 1/4” Aluminum, 1/2” Plywood, 1/2” Phenolic
9/16
12S2794-01
2-1/2
14-2928
3 1/2“ OD 60T for 1/4” Aluminum, 1/2” Plywood, 1/2” Phenolic
15/16“
12S2794-02
3-3/8
in
Tool Series
Diameter
Model
12S1288-04
in
2
Saw Blades - 3/4” arbor hole
Used on Cleco Dotco Saws
•
Used for sawing non-metallic materials
Model
Description
Diameter
in
in
14-2690
4“OD Diamond 60-80 Grit for Fiberglass, Composite, Carbon Fiber
1“ x 5/64“
4
14-2700
4“OD Carbide Tip 20T for Thicker Fiberglass, Plastic Laminates to 1/2” thick
1“ x 7/64“
4
14-2710
4“OD Carbide Tip 20T special for Thin non-ferrous material (to approx . 1/8” thick)
1“ x 7/64“
4
14-2711
4“OD Carbide Tip 12T Special for Thicker non-ferrous material (to approx . 1/2” thick)
1“ x 7/64“
4
Specialty Tools
Maximum Depth of Cut
CAUTION: These carbide chip and tip and diamond blades are not to be used on metallic materials.
Slim blade for easy cutting of fiberglass, with minimum dust -36 grit on periphery and 80 grit on the sides.
271
