EN Cleco Catalog - SP-1081 Online - Catalog - Page 201
Riveting
RB46 Series - Pressure Riveting Unit for C Yoke or Alligator Jaws
Up to 5/16” / 8mm Capacity Al rivets
•
•
•
•
•
The RB 46 pressure riveting assembly comprises a hydropneumatic generator, a hydraulic cylinder and a regulator for setting the force (max. 7 tonnes).
It uses various standard and special yokes to form solid rivets made from
various materials.
It is easy to use and adjust, making it suitable for all riveting operations on
assembly rigs and for maintenance repairs.
The work cycle is performed automatically after initiation by the operator.
- quick feed at low pressure until rivet contact
- high pressure squeezing at preset forces
- automatic return.
The principle of this riveting assembly is based on automatic control of the
squeezing force ; no additional adjustment is required to squeeze rivets of the
same type, diameter and material on assemblies of varying thicknesses.
An adjusting nut can be used to reduce the return stroke to shorten the riveting time.
Model
Maximum Force
Accessories
T | Lb
Hose Length
m
1.80, 5.9
60203016
7T | 15400 lbs
Select Rivet Set from:RB 400 for countersink rivets
RB 401 for universal head type rivets
RB 402 for special reduced universal head rivets
1.80, 5.9
60203106
7T | 15400 lbs
Select Rivet Set from:RB 400 for countersink rivets
RB 401 for universal head type rivets
RB 402 for special reduced universal head rivets
3, 9.8
7T | 15400 lbs
Select Rivet Set from:RB 400 for countersink rivets
RB 401 for universal head type rivets
RB 402 for special reduced universal head rivets
3, 9.8
60203006
60203116
Riveting
7T | 15400 lbs
Select Rivet Set from:RB 400 for countersink rivets
RB 401 for universal head type rivets
RB 402 for special reduced universal head rivets
201
