23 426870 Camden Standard Landscape Details - August 2023 - Flipbook - Page 43
ASPHALT. AC5 AUSPEC MIX
MINIMUM 100mm DEEP DGB20 TO 100%
STANDARD DRY COMPACTION
50 x 50 x 450mm H4 TREATED PINE STAKES @1200mm C/C
USE ONLY HOT DIPPED GALVANISED BATTEN SCREW
FIXINGS. TOP OF PEG SET DOWN 25mm FROM TOP OF
TIMBER EDGE
25 x 150mm H4 TREATED PINE TIMBER EDGE FINISHED
FLUSH WITH SURFACE LEVEL. SAW-CUT TO ALLOW
BENDING AND TO ENSURE SMOOTH CURVED EDGES
ADJACENT TURF LAID FLUSH TO
ASPHALT. REFER TURF DETAILS
75
150
450
150
100
25
20
ADJACENT TURF LAID FLUSH TO CRUSHED
SANDSTONE. REFER TURF DETAILS
EXISTING SUBGRADE
50 x 50 x 450mm H4 TREATED PINE STAKES @1200mm
C/C USE ONLY HOT DIPPED GALVANISED BATTEN
SCREW FIXINGS. TOP OF PEG SET DOWN 25mm FROM
TOP OF TIMBER EDGE
SUITABLE COMPACTED SUBGRADE
(100% SMDD) UNDER ASPHALT
AREA
EXISTING SUBGRADE
RF WITH TIMBER EDGE
PE PEDESTRIAN ASPHALT TO TURF WITH TIMBER EDGE
5.3
1:10 @ A1
SECTION - TYPICAL
1:10 @ A1
DRAFT
NOTES
1.
2.
3.
4.
SCALE
SHOWN AS PER DETAILS @ A1
DO NOT SCALE DRAWINGS. USE FIGURED DIMENSIONS ONLY.
ALL SERVICES ARE SHOWN AT APPROXIMATE LOCATION ONLY. ALL SERVICES TO BE CHECKED FOR
LOCATION AND DEPTH PRIOR TO COMMENCEMENT OF WORKS. LOCATION OF PRIVATE SERVICE
FACILITIES IS NOT SHOWN. LOCATE AND ADJUST TO SUIT NEW WORKS.
THIS DRAWING IS TO BE READ IN CONJUNCTION WITH ALL RELEVANT CONTRACTS, SPECIFICATIONS,
REPORTS AND DRAWINGS. IF THERE IS ANY CONFLICTING INFORMATION WITHIN ALL RELEVANT
CONTRACTS, SPECIFICATIONS, REPORTS AND DRAWINGS SEEK IMMEDIATE CLARIFICATION FROM
SUPERINTENDENT BEFORE PROCEEDING.
CONFIRM ALL DIMENSIONS AND LEVELS ON SITE PRIOR TO COMMENCEMENT OF WORK
THESE DESIGNS PLANS AND SPECIFICATIONS AND THE COPYRIGHT THEREIN ARE THE PROPERTY OF
CAMDEN COUNCIL AND MUST NOT BE USED, REPRODUCED OR COPIED, WHOLLY OR IN PART OR
TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE EXPRESS WRITTEN PERMISSION OF
CAMDEN COUNCIL.
SHEET No.
HS - PE - S5
STATUS
DRAFT
REVISION
A