GW Catalog Book - Flipbook - Page 606
Disc Brake Piston Tool
One-Man Brake Bleeder
Designed to rotate the parking-brake-activated piston back
into the caliper cylinder when replacing worn pads on vehicles
equipped with 4-wheel disc brakes
Tool functions on most domestic and import vehicles
Caution: Not intended for use on power tools
Attach bleeder to loosened bleeder screw and pump brake pedal until all
air bubbles are removed from the hose
Two adapters fit most bleeder screws and prevent leakage while keeping
the hose in place
Anti-suck back valve on end of hose
AUTOMOTIVE
SPECIALTY
AUTOMOTIVE
SPECIALTY
BRAKE & WHEEL
Cat. No.
Drive Tang Size
Product Weight
Cat. No.
Description
Product Weight
3163D
3/8 in
0.20 lb
2538D
One-Man Brake Bleeder
0.80 lb
Air Pump Brake Bleeder Tank
GM-Ford Disc Brake Piston Tool
Diaphragm-type bleeder for conventional and anti-lock brake systems allows
for one-man operation
Diaphragm keeps brake fluid and air separated
Custom adaptors available for many makes and models
Holds approximately 4 gallons
Includes combination quick coupler plus automatic fluid shut-off
Caution: For use with DOT 2, 3, 4 and 5 brake fluids only, not for use with any
other brake/hydraulic fluids
Rotates piston back on GM and Ford vehicles equipped with rear
wheel disc brakes
Fits GM Vehicles with 2-1/8 and 1-7/8" pistons and Ford vehicles
1987 to current with rear disc brakes
Designed for use with a 3/8" square drive tool
Caution: For intended use only
Cat. No.
Drive Tang Size
Product Weight
3355D
3/8 in
0.20 lb
Cat. No.
Description
Product Weight
3795D
Air Pump Brake Bleeder Tank
20.6 lb
Heavy Duty Brake Pad Separator
Helps to move front disc brake pistons back into position while installing
new brake shoes
Works with most disc brake systems with single piston caliper
Features heavy-duty center screw and pressure plate for extended use
Use with a 1/2" wrench or socket
Upgraded with a knob that allows for use with both a 5/16" socket wrench
or by hand
Heavy-duty plate to reduce bending
Solid swivel foot will not collapse or crush under pressure
Caution: Not intended for use on power tools
Hand Pump Brake Bleeder Tank
Safe, portable tank fills and pressurizes standard and power brake systems
Operates from hand pump pressure, eliminating the need for an air compressor
Only a few pumps are needed to build pressure to 10 to 15 PSI
Tank is serviceable and features quick disconnect coupler and shut-off valve
that is used as a source for brake fluid when topping off master cylinders with
brake bleeder adapter attached
Cat. No.
604
Description
Product Weight
2901D
Hand Pump Brake Bleeder Tank
5.50 lb
Cat. No.
Description
Product Weight
222273
Pressure Gauge for Brake Bleeder 2901D
0.35 lb
3525D
Heavy-Duty Brake Pad Separator
0.83 lb
222276
Quick Disconnect Coupler for Brake Bleeder 2901D
0.03 lb
290171
O-Ring for Brake Bleeder 2901D
0.01 lb
www.GEARWRENCH.com
605
