GW Catalog Book - Flipbook - Page 535
Tool Steel Long Pin Punch
Long Taper Punches
Manufactured from shock-resistant tool steel for unequalled
strength, toughness, and durability without brittleness
Full shank is heat treated, hardened, and tempered to extend the
life of the tool
Pin area is precision ground to prevent binding in the work area
Modified parabolic head directs striking force to the center of the tool
to resist mushrooming and chipping
Black oxide finish inscribed with a visible “Wear safety goggles” reminder
Hex stock fits securely into a punch and chisel holder and reduces rolling
on work surfaces
Meets or exceeds ASME B107.48m and US federal spec. GGG-P-831F
Made in the USA
Used to install or remove pins and shafts, or to align holes
Softened and tapered striking end reduces the potential to chip
Ground surface finish for greater ease of identification
Precision hardened working end is ideal for punching metal
Meets or exceeds ASME B107.47
Cat. No.
Cat. No.
Point Diameter
Stock Size
Overall Length
Product Weight
70-041G
.125 in
.312 in
8 in
0.250 lb
70-042G
.156 in
.312 in
8 in
0.150 lb
70-043G
.187 in
.375 in
8 in
0.250 lb
70-044G
.218 in
.375 in
8 in
0.180 lb
70-045G
.25 in
.375 in
8 in
0.190 lb
70-047G
.312 in
.437 in
8 in
0.300 lb
70-049G
.375 in
.5 in
8 in
0.360 lb
Used to install or remove pins and shafts, or to align holes
Softened and tapered striking end reduces the potential to chip
Ground surface finish for improved ease of identification
Precision hardened working ends ideal for punching metal
Overall Length
Product Weight
.375 in
8 in
0.21 lb
82279
.156 in
.5 in
8.5 in
0.36 lb
82280
.187 in
.5 in
9 in
0.38 lb
82281
.25 in
.625 in
11 in
0.79 lb
Center Punches
Ideal for marking center lines and pilot drill locations
Striking end is softened and tapered to reduce chipping
Ground surface finish offers better ease of identification
Precision hardened working end toughened to punch metal
Meets or exceeds ASME B107.47
Point Diameter
Stock Size
Overall Length
Product Weight
82269
.937 in
.25 in
4.25 in
0.06 lb
82270
.156 in
.375 in
5 in
0.13 lb
82271
.25 in
.437 in
5.5 in
0.20 lb
Center Punches
Cat. No.
Included Storage
Product Weight
82307
None
1.72 lb
Cat. No.
Description
Cat. No.
Description
82278
1/8” x 8” Long Taper Punch
82280
3/16” x 9” Long Taper Punch
82279
5/32” x 8-1/2” Long Taper Punch
82281
1/4” x 11” Long Taper Punch
www.GEARWRENCH.com
Stock Size
.125 in
Cat. No.
4 Pc. Long Taper Punch Set
532
Point Diameter
82278
STRIKING I STRUCK
STRIKING I STRUCK
PUNCHES & CHISELS
Manufactured from high alloy steel for incredible strength
Heat treated for long lasting durability
Pointed tip marks intersecting center lines, hole locations, or pilot drill
starting points in metal
Black oxide finish inscribed with a visible “Wear safety goggles” reminder
Hex stock fits securely into a punch and chisel holder and reduces rolling on work surfaces
Made in the USA
Cat. No.
Point Diameter
Stock Size
Overall Length
Product Weight
70-233G
.156 in
.312 in
4.375 in
0.08 lb
70-235G
.156 in
.375 in
5 in
0.14 lb
70-239G
.312 in
.5 in
6 in
0.40 lb
70-241G
.375 in
.625 in
6.25 in
0.50 lb
533
