ADDAGRIP COLOUR SPREADS Contractor v13 - Flipbook - Page 55
Normally the Part A resin will
be mixed in its own container
with Part B. When this is done
correctly the resultant material in
the container is inert and the label
must be defaced. The container
and remnants may be disposed
of as normal industrial waste.
Any uncured material must be
disposed as hazardous waste or
keep for future projects as per
shelf life. Comply with regional
or national regulations regarding
disposal.
If your surface has chewing gum,
use a biodegradable remover
for effective cleaning. Oil stains
should be addressed promptly
with a biodegradable oil stain
remover. The Addagrip MC
machine can also remove rubber
tyre marks easily. To maintain
efficient rainwater drainage,
ensure regular maintenence
that includes suction cleaning
and sweeping, using a suitable
wet and dry vacuum. This
comprehensive approach will
keep your resin surface clean
and well-maintained.
CURE SCHEDULE:
VEGETATION:
This is dependant on atmospheric
conditions and for UV system
amount of catalyst added. Within
24 hours the surface is expected
to be hard and not tacky, it
may be walked on at this time.
However, due to dirt retention pick
up, avoid driving on the surface
until 1-2 days later. Full chemical
cure is expected by day 7.
The resin bound surface should
be regularly cleared of leaves
etc. to prevent possible tanning
staining and moss growth,
most vegetation can be easily
removed using a jet wash or the
Addagrip MC surface cleaner.
DISPOSAL:
ROUTINE
MAINTENANCE &
GENERAL CLEANING:
To clean your resin bound surface
effectively, start with general
cleaning using a cold pressure
washer with a maximum of 150 bar
rating. The fan type lance should
be used, held about 200mm
above the surface to remove
dirt and grime without causing
damage due to excesive water
pressure. For a deeper clean,
Addagrip MC surface cleaning
machine is highly recommended.
This machine, equipped with a
patented brush, is designed not
only for resin surfaces but also for
cleaning pavers, natural stone,
concrete and wood decking,
using just water, making it an
environmentally friendly choice.
Some airborne weed growth may
require treatment with a suitable
weed killer. An initial small test
area should be carried out to
confirm suitability. Tannin marks
can be removed using diluted
sodium hypochlorite.
SNOW, ICE & FROST:
Damaged surfaces should be
repaired as soon as possible.
Please contact the contractor
who installed the surface. Areas
subject to snow, ice and frost
can be treated using rock salt
or liquid de-icers, however, this
may be harmful to plants and
can damage surrounding metal
or concrete surfaces. Excessive
snow should be shovelled away
using a plastic snow shovel,
taking care not to damage the
resin bound surfacing. Do not
use a wire brush ice remover.
MANUFACTURING &
QUALITY SYSTEMS:
Addagrip Terraco has the
BS EN ISO 9001:2015 Quality
Assurance and BS EN ISO
14001:2015 Environmental
Management accreditations.
Our quality policy ensures
complete works traceability of
every product sent out the door.
Colour and variations in size
must be expected in natural
aggregates.
NORMAL/
ABNORMAL USE:
Rust spotting may occur due to
iron particles naturally found in
some aggregates.
The resin bound surface has
been designed for normal
pedestrian and vehicular traffic
use, therefore protection should
be provided wherever possible
against abnormal usage.
Abnormal usage applies to heavy
objects such as skips, these
should not be dragged across
the surface and any point loading
must use padding.
CERTIFICATES:
Addaset, Addabound and
Terrabound are BBA accredited
– Agrément Certificate 16/5288.
Our resin bound systems also
have a Type III Environmental
Product Declaration of
construction products to
EN15804+A2 PN 514 Rev 3.0.
All resin bound surfaces are
SUDs compliant. Stonebound
HB UV has a fire roof rating of
BroofT4 (CEN/TS 1187:2012
Test 4 including:
EN13501:2016-Test 4) and
EXT.F.AA (BS 476-3:2004).
55
