DAMPA 100 200 300 - e-katalog - Catalog - Page 7
1
2
3
Splicing of Carriers
Securing the Units
Closed Jointing Details
Modular Carrier No. 40 is provided with
pre-punched lugs and cutouts for modular
splicing.
If necessary, the ceiling units can be
locked in position by pushing down the
reverse clip behind the wide flange.
Closed joints are formed under Modular
Carrier No. 43 ( double carrier) rigidly
suspended from the deckhead above.
Locate the carrier ends so that the cutouts
overlap and lock together by folding the
lugs inwards.
4
5
Featured Joint
Featured joints of DAMPA® 200 and 300
ceiling units are formed under Modular
Carrier No. 43 (double carrier) rigidly
suspended from the deckhead above.
In this case the carriers are to be ordered
in painted execution.
6
Jointing Detail Using
Pluschannel Type 3
This jointing principle is suitable for all
DAMPA® 100/200/300 ceiling units.
The ceiling units are engaged into the clips
of the Pluschannel Type 3, rigidly suspended from the deckhead above.
Curved
The carrier is fastened at 300 mm
centres to a pre-shaped hard core or
metal structure spaced at 1200 mm
centres maximum.
The distance between pluschannels and
modular carriers or two pluschannels must
not exceed 300 mm.
Curved surfaces of DAMPA® 100/200/300
ceiling units to a radius of 20 m or more,
corresponding to an arch of 100 mm over
a span of 4 m, may be formed with standard Modular Carrier No. 40 suspended
from standard hangers.
Weight
Dismantling
The average weight of a
DAMPA® 100/200/300 ceiling including
suspension components is as low
as 2.7 - 3.4 kg per sq.m depending
on type and execution.
It is possible to remove and reinstale
individual ceiling units without the use
of tools.
For specific project-related weight
calculations, please see the weight
of each item.
To remove, pull the unit towards you
horizontally and simultaneously push
the nearest adjacent one
7
