DAMPA 10 100 200 300 modules - Catalog - Page 5
15 mm
15 mm
8
9
Concave or convex curved surfaces to a minimum radius of
500 mm can be achieved using Modular Carrier No. 44.
The two types of linear ceilings are both in 100 mm module
and are clipped on Modular Carrier No. 40.
The carrier is fastened at 300 mm centres to pre-shaped timber
or metal profiles spaced at 1350 mm centres maximum.
The DAMPA® 10 ceiling system is a stand-alone system with
sides of the profile sloping outwards.
The DAMPA® 100 ceiling system, with right angle sides, can be
integrated into a solution with DAMPA 200 and DAMPA 300 as
part of a design combination or as adjustment profiles.
Dismantling
It is possible to remove and reinstall individual ceiling units
without the use of tools. To remove, pull the unit towards you
horizontally and simultaneously push the nearest adjacent one.
Modules
DAMPA® 10
DAMPA® 100/200/300
Module 100 mm, material thickness 0.45 mm
Module 100 mm, material thickness 0.45 mm
Product
Average
Consumption
Packing
Modular Carrier No. 40
1.10 m/sq. m
10 units/bundle
Adjustment Clip No. 5
0.85 unit/sq. m
350 units/box
Hang o. 5
suspended 500 mm)
0.45 m/sq. m
100 m/coil
Edge Trim Type 1
0.50 m/sq. m
10 units/carton
Edge Trim Type 2
0.50 m/sq. m
10 units/carton
Module 200 mm, material thickness 0.55 mm
Module 300 mm, material thickness 0.70 mm
Product
Average
Consumption
Packing
Modular Carrier No. 40
1.10 m/sq. m
10 units/bundle
Adjustment Clip No. 5
0.85 unit/sq. m
350 units/box
Hanger No. 5
suspended 500 mm)
0.45 m/sq. m
100 m/coil
Edge Trim Type 1
0.50 m/sq. m
10 units/carton
Edge Trim Type 2
0.50 m/sq. m
10 units/carton
