DAMPA 10 100 200 300 modules - Catalog - Page 4
4
5
Adjustment Clip No. 5 is located into the slots provided in
the modular carrier. Minimum suspension height is 170 mm.
Modular Carrier No. 40 is provided with pre-punched lugs and
cut-outs for modular splicing.
The pull-out force of the hanger must be at least 2.5 times
the hanger load.
Locate the carrier ends so that the cut-outs overlap and lock
together by folding the lugs inwards.
6
7
Closed joints are formed under Modular Carrier No. 43 (double
carrier). Hangers must be fastened alternatively to both sides of
the carrier to prevent twisting.
Featured joints are formed under Modular Carrier No. 43 (can be
supplied painted). The maximum width of the open joint is 50 mm.
