GB DAMPA Interval 31 32 33 e-katalog - Catalog - Page 3
Installation of DAMPA® Interval 31/32/33
The open gap between the DAMPA® Interval
units creates the linear look and draws
attention to the deep square edged
aluminium profile.
A combination of the various modules of
100, 200 and 300 mm offers the designer
complete flexibility.
All modular carrier and hanger centres are
maximum distances.
Max. distance
Aluminium
A
300 mm
B
1800 mm
C
1800 mm
1
100
100
100
100
100
100
Installed in the same modular carrier all
types have an open gap of 45 mm.
30
40
31
55
32
45
155
33
45
255
30 mm
Max. 300 mm
2
3
Adjustment
Clip No. 5 with Hanger No. 5 is
located into the slots provided in the
modular carrier.
The pull-out force of the hanger must be at
least 2.5 times the hanger load.
4
The modular carriers are joined using
Carrier Splice No. 26.
Place the splice over the carrier ends
and secure each carrier using two 3.2 mm
diameter pop rivets through the holes
provided.
This will automatically maintain the
module.
When installing ceilings requiring panel
lengths greater than 6 m, jointing can
be achieved by forming a desired gap
between the ends of the panels.
