SUNEX Tools Lifting - Transmission Jacks - 2023 SUNEX Tools Catalog (Public) - Catalog - Page 167

SUNEX Tools Lifting - Transmission Jacks

TRANSMISSION JACKS - LIFTING
167
1000 LB. TELESCOPIC TRANSMISSION JACK
Lowered telescopic rams enable the transmission to be transferred to work
table and reach a maximum height of 73.5".
700 LB. TRANSMISSION JACK
7796 - 1000 LB. AIR/HYDRAULIC
MODEL #
CAPACITY (LBS.)
LOW HEIGHT (IN.)
7796
1000
35
7700C
700
50.8
Telescopic rams enable transmission to be transferred from jack to
work table and extend to reach a max height of 70.5".
JACKS
• Universal saddle with four ratcheting arms quickly adjust to any
transmission pan configuration
• 2" non-marring tension straps make position adjustments and holding
safer, faster and easier
• Knobs adjust tilt of saddle forward and backward as well as side to side
• First stage ram conveniently operated by hands-free foot pedal
• Second stage reaches maximum 73.5" height by hand pump
• Safety overload valve prevents jack from being used beyond
rated capacity
• Two foot activated pedals provides hands-free raising and lowering
• Handle for easy mobility across the shop floor with or without a load
• 4 swivel casters (2 locking) provide stability and easy maneuverability
• Universal saddle with four adjustable arms quickly adjust to any
transmission pan configuration
• Chain tie down fastens the load to the saddle and secures the load
• Knobs adjust tilt of saddle forward and backward and side to side
• Manual/air telescopic ram for controlled lift and precise load control
• Safety overload valve prevents jack from being used beyond
rated capacity
• Handle for pumping to raise ram to load
• 4 swivel casters (2 locking) provide stability and easy mobility
7700C - 700 LB. SINGLE STAGE
HIGH HEIGHT
(IN.)
SADDLE TILT
FORE AND AFT
SADDLE TILT
SIDE TO SIDE
BASE (IN.)
SHIPPING
WT. (LBS.)
73.5
37° by 26°
70.5
15° by 15°
12°
30 x 30
167
15°
29.5 x 29.5
68
FUEL TANK ADAPTER
Designed for use on all underhoist transmission jacks for the removal,
installation and moving of emptied automotive gas tanks.
• Quick and easy installation to all ratcheting finger transmission jack
saddle and comes with a universal adapter plate for all other saddles
• Foam support pads can adjust for height, width and length to fit any
4 gallon gas tank configuration
• Ground wire assembly prevents static electric discharge on older
metal tanks
• Two 8’ tie-down straps secure the tank to the adapter.
7706
MODEL #
CAPACITY (LBS.)
7706
Up to 40 Gallon
Empty Fuel Tank
OVERALL
LENGTH (IN.)
OVERALL
WIDTH (IN.)
OVERALL
HEIGHT (IN.)
SADDLE ADJUSTMENT
LENGTH (IN.)
SADDLE ADJUSTMENT
WIDTH (IN.)
24.5
15
7.2
24.5° by 39.75°
15 to 19
SADDLE ADJUSTMENT SHIPPING
HEIGHT (IN.)
WT. (LBS.)
7.2 to 11
52
SUNEXTOOLS.COM

Paperturn flip book system